CNC Surface Grinding C260 Brass is part of VT machining's grade-specific capability. C260 Brass is free-machining with good conductivity, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Surface Grinding Capability for C260 Brass
- Free-machining
- Good conductivity
- Attractive finish
- Tolerance to ±0.01 mm
Machining C260 Brass with CNC Surface Grinding
C260 Brass behaves predictably under CNC Surface Grinding once parameters are dialled in: machinability is excellent (free-machining); fast speeds, clean finish, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C260 Brass run consistently from one batch to the next.
CNC Surface Grinding Tolerances & Surface Finish
Ground C260 Brass reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished C260 Brass parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Surface Grinding Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C260 Brass part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC Surface Grinding C260 Brass
We are happy to suggest design tweaks that improve manufacturability. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on C260 Brass efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
Why C260 Brass?
C260 Brass is chosen when a part needs what this grade offers — it is free-machining with good conductivity. We confirm the grade and any temper or heat-treat condition with you before machining.
Applications of CNC Surface Grinding C260 Brass
Customers order CNC Surface Grinding C260 Brass components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Surface Grinding C260 Brass
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
C260 Brass in Other Processes
Related
Need CNC Surface Grinding C260 Brass for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Surface Grinding C260 Brass?
Achievable tolerances for C260 Brass grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Surface Grinding on C260 Brass?
Machined C260 Brass edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is CNC Surface Grinding C260 Brass and how is it done?
CNC Surface Grinding C260 Brass refers to surface grinding produces flat, parallel faces with fine finish using a horizontal abrasive wheel. Applied to C260 Brass — free-machining with good conductivity — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What material thickness or size range suits CNC Surface Grinding C260 Brass?
We machine C260 Brass across a broad size range; share your part envelope for confirmation.
What surface finish is achievable on C260 Brass with CNC Surface Grinding?
Grinding can take C260 Brass to a fine finish — typically Ra 0.1–0.4 µm, and to a mirror grade on suitable alloys.