VT machining provides CNC Sinker EDM NAK80 Mold Steel for customers who need accurate, repeatable NAK80 Mold Steel components. The machinability of NAK80 Mold Steel is pre-hardened or machined-then-hardened; polishes to high finish for molds, so we set the operation up specifically for this grade.
CNC Sinker EDM Capability for NAK80 Mold Steel
- Mold-grade cleanliness
- Polishable to mirror finish
- Hardenable to 48–54 HRC
- Tolerance to ±0.005 mm
Machining NAK80 Mold Steel with CNC Sinker EDM
NAK80 Mold Steel behaves predictably under CNC Sinker EDM once parameters are dialled in: machinability is pre-hardened or machined-then-hardened; polishes to high finish for molds, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of NAK80 Mold Steel run consistently from one batch to the next.
Why NAK80 Mold Steel?
NAK80 Mold Steel is chosen when a part needs what this grade offers — it is mold-grade, polishable and hardenable. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Sinker EDM Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every NAK80 Mold Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
CNC Sinker EDM Tolerances & Surface Finish
EDM holds tolerances to roughly ±0.002–0.005 mm with no cutting force on the NAK80 Mold Steel part, producing fine, controlled surface textures and sharp internal corners impossible to mill.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished NAK80 Mold Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Sinker EDM NAK80 Mold Steel
We are happy to suggest design tweaks that improve manufacturability. EDM suits sharp internal corners, thin ribs and hardened NAK80 Mold Steel that cannot be milled; allowing a small corner radius where possible speeds the cut. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Sinker EDM NAK80 Mold Steel
Customers order CNC Sinker EDM NAK80 Mold Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Sinker EDM NAK80 Mold Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
NAK80 Mold Steel in Other Processes
Related
Need CNC Sinker EDM NAK80 Mold Steel for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Sinker EDM NAK80 Mold Steel?
CNC Sinker EDM prototypes for NAK80 Mold Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Can VT machining make custom NAK80 Mold Steel parts to my drawing?
Yes. NAK80 Mold Steel NAK80 Mold Steel EDM machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What surface finish is achievable on NAK80 Mold Steel with CNC Sinker EDM?
Surface finish on NAK80 Mold Steel is controlled to your specification; we confirm the achievable Ra against your callout.
How clean are the edges produced by CNC Sinker EDM on NAK80 Mold Steel?
Machined NAK80 Mold Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Why is NAK80 Mold Steel a good choice for CNC Sinker EDM?
NAK80 Mold Steel is mold-grade, polishable and hardenable, which makes it well suited to CNC Sinker EDM. We tune the process to the alloy so the finished NAK80 Mold Steel EDM machining part meets your dimensional and functional requirements.