VT machining provides CNC Saw Cutting Ti-6Al-4V Titanium for customers who need accurate, repeatable Ti-6Al-4V Titanium components. The machinability of Ti-6Al-4V Titanium is difficult; low speeds, high feeds, flood coolant to manage heat, so we set the operation up specifically for this grade.
CNC Saw Cutting Capability for Ti-6Al-4V Titanium
- High strength-to-weight
- Biocompatible
- Corrosion resistant
- Tolerance to ±0.01 mm
Ti-6Al-4V Titanium Material Data
| Density | 4.43 g/cm³ |
|---|---|
| Tensile strength | 950 MPa |
| Yield strength (0.2%) | 880 MPa |
| Hardness | 334 HB / 36 HRC |
| Melting point | 1604–1660 °C |
| Thermal conductivity | 6.7 W/m·K |
| Thermal expansion | 8.6 ×10⁻⁶/K |
| Electrical conductivity | 3.1% |
| Machinability (C36000 = 100%) | 22% |
| Grades we run | Gr 1, Gr 2 (CP), Gr 5 Ti-6Al-4V, Gr 23 ELI, Gr 7, Gr 9 |
Published typical values for Ti-6Al-4V (Gr 5). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat has nowhere to go — thermal conductivity is 1/25th of aluminium, so it all goes into the tool. Low surface speed, heavy feed, flood coolant, and the cutter never stops moving.
Machining Ti-6Al-4V Titanium with CNC Saw Cutting
Ti-6Al-4V Titanium behaves predictably under CNC Saw Cutting once parameters are dialled in: machinability is difficult; low speeds, high feeds, flood coolant to manage heat, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of Ti-6Al-4V Titanium run consistently from one batch to the next.
Achievable Tolerances for CNC Saw Cutting Ti-6Al-4V Titanium
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why Ti-6Al-4V Titanium?
Ti-6Al-4V Titanium is chosen when a part needs what this grade offers — it is high strength-to-weight, biocompatible and corrosion resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Secondary Operations & Finishing
Finished Ti-6Al-4V Titanium parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Saw Cutting Ti-6Al-4V Titanium
We are happy to suggest design tweaks that improve manufacturability. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Ti-6Al-4V Titanium. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Saw Cutting Tolerances & Surface Finish
Formed Ti-6Al-4V Titanium holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
CNC Saw Cutting Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every Ti-6Al-4V Titanium part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Applications of CNC Saw Cutting Ti-6Al-4V Titanium
Customers order CNC Saw Cutting Ti-6Al-4V Titanium components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Saw Cutting Ti-6Al-4V Titanium
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for Ti-6Al-4V Titanium
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Type II anodise | — | Colour coding, biocompatible |
| Type III anodise | — | Anti-galling for threaded and sliding parts |
| Passivation | — | ASTM F86 for implant-grade parts |
| Electropolish | 5–20 µm removed | Removes the machining layer for medical use |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Saw Cutting Ti-6Al-4V Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Ti-6Al-4V Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Ti-6Al-4V Titanium in Other Processes
Related
Send the drawing, the Ti-6Al-4V Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Saw Cutting Ti-6Al-4V Titanium?
Achievable tolerances for Ti-6Al-4V Titanium forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Saw Cutting Ti-6Al-4V Titanium?
We form Ti-6Al-4V Titanium sheet and plate to your developed flat pattern and bend sequence.
What is the typical lead time and minimum order for CNC Saw Cutting Ti-6Al-4V Titanium?
CNC Saw Cutting prototypes for Ti-6Al-4V Titanium can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
How clean are the edges produced by CNC Saw Cutting on Ti-6Al-4V Titanium?
Machined Ti-6Al-4V Titanium edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Why is Ti-6Al-4V Titanium a good choice for CNC Saw Cutting?
Ti-6Al-4V Titanium is high strength-to-weight, biocompatible and corrosion resistant, which makes it well suited to CNC Saw Cutting. We tune the process to the alloy so the finished Ti-6Al-4V Titanium forming part meets your dimensional and functional requirements.