CNC Punching M2 High Speed Steel

VT machining offers CNC Punching for M2 High Speed Steel (UNS T11302 / 1.3343 / SKH51), typically supplied annealed or hardened. General-purpose HSS; hardened parts are ground or EDM'd.

CNC Punching Notes for M2 High Speed Steel

CNC Punching is rarely the right route for M2 High Speed Steel: in its usual condition (Annealed or hardened, ~230 HB annealed; 62-65 HRC) it is not suited to this process. We normally recommend grinding, EDM or machining from bar instead — send the drawing and we will suggest the most economical method.

M2 High Speed Steel punches cleanly with standard clearance; minimum hole diameter is about the sheet thickness.

For estimating, a 100 × 100 × 10 mm block of M2 High Speed Steel weighs about 0.82 kg.

M2 High Speed Steel Data Relevant to CNC Punching

Equivalent designationsUNS T11302 / 1.3343 / SKH51
Typical supply conditionAnnealed or hardened
Hardness (typical)~230 HB annealed; 62-65 HRC

Typical values; we work to your drawing and mill certificate.

More on CNC Punching Alloy Steel

Finishing options, quality documentation and general cnc punching guidance for all alloy steel grades are on our CNC Punching Alloy Steel page.

Quoting CNC Punching M2 High Speed Steel

Send a STEP/IGES model or PDF drawing, confirm M2 High Speed Steel and its condition (we usually see it supplied annealed or hardened), the quantity, critical tolerances and any finish or certificate requirements.

M2 High Speed Steel in Other Processes

Related

Send the drawing, the M2 High Speed Steel condition and the quantity — pricing and lead time come back the same or next business day.

Request a Quote

Frequently Asked Questions

What tolerances can you hold for CNC Punching M2 High Speed Steel?

Achievable tolerances for M2 High Speed Steel punching depend on the alloy, geometry and feature size. Punching holds hole-position repeatability to around ±0.10 mm. Exact figures are confirmed against your drawing callouts.

What material thickness or size range suits CNC Punching M2 High Speed Steel?

Punching suits M2 High Speed Steel sheet roughly 0.5–6 mm thick, with clearance matched to the gauge.

Can VT machining make custom M2 High Speed Steel parts to my drawing?

Yes. M2 High Speed Steel punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.

What surface finish is achievable on M2 High Speed Steel with CNC Punching?

Surface finish on M2 High Speed Steel is controlled to your specification; we confirm the achievable Ra against your callout.