VT machining provides CNC Punching 316L Stainless Steel for customers who need accurate, repeatable 316L Stainless Steel components. The machinability of 316L Stainless Steel is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, so we set the operation up specifically for this grade.
CNC Punching Capability for 316L Stainless Steel
- Austenitic/martensitic grades
- Corrosion resistant
- Tolerance to ±0.01 mm
- Typical hardness 70–200 HB (annealed)
316L Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining 316L Stainless Steel with CNC Punching
316L Stainless Steel behaves predictably under CNC Punching once parameters are dialled in: machinability is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 316L Stainless Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Punching 316L Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Hole position across sheet | ±0.15 mm | ±0.10 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Overall blank size | ±0.20 mm | ±0.10 mm |
| Minimum hole | 1.0 × thickness | 0.8 × thickness |
| Hole-to-edge distance | 2.0 × thickness | 1.5 × thickness |
| Burr height | 0.08 mm | 0.03 mm (deburred) |
| Sheet thickness range | 0.5–6.0 mm | 0.5–3.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Punching Tolerances & Surface Finish
Punched 316L Stainless Steel holds hole-position repeatability around ±0.10 mm across the sheet, with consistent hole quality when punch/die clearance is matched to the gauge.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished 316L Stainless Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Punching Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 316L Stainless Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why 316L Stainless Steel?
316L Stainless Steel is chosen when a part needs what this grade offers — it is corrosion resistant, strong and hygienic. We confirm the grade and any temper or heat-treat condition with you before machining.
Design Tips for CNC Punching 316L Stainless Steel
We are happy to suggest design tweaks that improve manufacturability. Keeping hole-to-edge and hole-to-hole distances at least 1.5–2× thickness avoids distortion and tearing in punched 316L Stainless Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Punching 316L Stainless Steel
Customers order CNC Punching 316L Stainless Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Punching 316L Stainless Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 316L Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Punching 316L Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 316L Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
316L Stainless Steel in Other Processes
Related
Send the drawing, the 316L Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom 316L Stainless Steel parts to my drawing?
Yes. 316L Stainless Steel 316L Stainless Steel punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What material thickness or size range suits CNC Punching 316L Stainless Steel?
Punching suits 316L Stainless Steel sheet roughly 0.5–6 mm thick, with clearance matched to the gauge.
What tolerances can you hold for CNC Punching 316L Stainless Steel?
Achievable tolerances for 316L Stainless Steel punching depend on the alloy, geometry and feature size. Punching holds hole-position repeatability to around ±0.10 mm. Exact figures are confirmed against your drawing callouts.
What is CNC Punching 316L Stainless Steel and how is it done?
CNC Punching 316L Stainless Steel refers to cNC turret punching shears holes and form features in sheet metal using programmable tooling for fast, repeatable patterns. Applied to 316L Stainless Steel — corrosion resistant, strong and hygienic — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Punching 316L Stainless Steel require dedicated tooling?
Punching uses programmable turret tooling; standard tools cover most patterns, with special tools added for unique forms.