CNC Punching 1060 Steel is part of VT machining's grade-specific capability. 1060 Steel is strong, economical and widely available, and we combine controlled punching with material-aware setup to produce parts that meet your specification.
CNC Punching Capability for 1060 Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
1060 Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining 1060 Steel with CNC Punching
1060 Steel behaves predictably under CNC Punching once parameters are dialled in: machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 1060 Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Punching 1060 Steel
| Feature | Standard | Precision |
|---|---|---|
| Hole position across sheet | ±0.15 mm | ±0.10 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Overall blank size | ±0.20 mm | ±0.10 mm |
| Minimum hole | 1.0 × thickness | 0.8 × thickness |
| Hole-to-edge distance | 2.0 × thickness | 1.5 × thickness |
| Burr height | 0.08 mm | 0.03 mm (deburred) |
| Sheet thickness range | 0.5–6.0 mm | 0.5–3.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Finished 1060 Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Punching 1060 Steel
We are happy to suggest design tweaks that improve manufacturability. Keeping hole-to-edge and hole-to-hole distances at least 1.5–2× thickness avoids distortion and tearing in punched 1060 Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Punching Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 1060 Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why 1060 Steel?
1060 Steel is chosen when a part needs what this grade offers — it is strong, economical and widely available. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Punching Tolerances & Surface Finish
Punched 1060 Steel holds hole-position repeatability around ±0.10 mm across the sheet, with consistent hole quality when punch/die clearance is matched to the gauge.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Punching 1060 Steel
Customers order CNC Punching 1060 Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Punching 1060 Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 1060 Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Punching 1060 Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 1060 Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
1060 Steel in Other Processes
Related
Send the drawing, the 1060 Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom 1060 Steel parts to my drawing?
Yes. 1060 Steel 1060 Steel punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Punching on 1060 Steel?
Punched 1060 Steel edges are clean when punch/die clearance is correct; we set clearance to the gauge and can add deburring if specified.
What tolerances can you hold for CNC Punching 1060 Steel?
Achievable tolerances for 1060 Steel punching depend on the alloy, geometry and feature size. Punching holds hole-position repeatability to around ±0.10 mm. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Punching 1060 Steel?
Punching suits 1060 Steel sheet roughly 0.5–6 mm thick, with clearance matched to the gauge.
Why is 1060 Steel a good choice for CNC Punching?
1060 Steel is strong, economical and widely available, which makes it well suited to CNC Punching. We tune the process to the alloy so the finished 1060 Steel punching part meets your dimensional and functional requirements.