CNC Press Brake Forming C260 Brass from VT machining delivers precision C260 Brass parts made to your exact drawing. Press brake forming creates bends and complex profiles with CNC-controlled ram depth and gauging, with parameters tuned to C260 Brass, which is free-machining with good conductivity.
CNC Press Brake Forming Capability for C260 Brass
- Free-machining
- Good conductivity
- Attractive finish
- Tolerance to ±0.01 mm
C260 Brass Material Data
| Density | 8.50 g/cm³ |
|---|---|
| Tensile strength | 340–470 MPa |
| Yield strength (0.2%) | 125–310 MPa |
| Hardness | 78–130 HB |
| Melting point | 885–900 °C |
| Thermal conductivity | 115 W/m·K |
| Thermal expansion | 20.5 ×10⁻⁶/K |
| Electrical conductivity | 26% |
| Machinability (C36000 = 100%) | 100% (the benchmark) |
| Grades we run | C36000 free-cutting, C37700 forging, C26000 cartridge, C46400 naval |
Published typical values for C36000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Nothing much — this is the easiest metal in the shop. Worth asking about if a copper or bronze part is cost-driven rather than conductivity-driven.
Machining C260 Brass with CNC Press Brake Forming
When forming C260 Brass, machinability is excellent (free-machining); fast speeds, clean finish. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for C260 Brass mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Press Brake Forming C260 Brass
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Press Brake Forming Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Why C260 Brass?
Customers select C260 Brass for CNC Press Brake Forming because it is free-machining with good conductivity. We handle grade verification and any required heat treatment or finishing.
CNC Press Brake Forming Tolerances & Surface Finish
Formed C260 Brass holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Secondary Operations & Finishing
Most C260 Brass parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Design Tips for CNC Press Brake Forming C260 Brass
Small design adjustments often cut cost and lead time. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed C260 Brass. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Press Brake Forming C260 Brass
C260 Brass parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Press Brake Forming C260 Brass
Starting your project takes one email. Send your CAD or 2D drawing, the C260 Brass grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for C260 Brass
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Nickel plate | 5–15 µm | Hard, bright, corrosion resistant |
| Chrome plate | 0.3–1 µm | Decorative, over nickel |
| Clear lacquer | 10–20 µm | Stops the natural tarnish |
| Tin plate | 3–15 µm | Solderable contacts |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming C260 Brass
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C260 Brass grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C260 Brass in Other Processes
Related
Send the drawing, the C260 Brass condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom C260 Brass parts to my drawing?
Yes. C260 Brass C260 Brass forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Which industries use CNC Press Brake Forming C260 Brass parts?
CNC Press Brake Forming C260 Brass parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C260 Brass components are required.
What material thickness or size range suits CNC Press Brake Forming C260 Brass?
We form C260 Brass sheet and plate to your developed flat pattern and bend sequence.
What is the typical lead time and minimum order for CNC Press Brake Forming C260 Brass?
CNC Press Brake Forming prototypes for C260 Brass can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.