Need reliable CNC Press Brake Forming 5754 Aluminum? VT machining machines 5754 Aluminum to tight tolerances and consistent quality. As a material, 5754 Aluminum is lightweight with excellent machinability; we adapt feeds, speeds and tooling to suit.
CNC Press Brake Forming Capability for 5754 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
5754 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining 5754 Aluminum with CNC Press Brake Forming
When forming 5754 Aluminum, machinability is excellent; high cutting speeds and superb finishes achievable. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for 5754 Aluminum mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Press Brake Forming 5754 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Most 5754 Aluminum parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Press Brake Forming Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Why 5754 Aluminum?
Customers select 5754 Aluminum for CNC Press Brake Forming because it is lightweight with excellent machinability. We handle grade verification and any required heat treatment or finishing.
Design Tips for CNC Press Brake Forming 5754 Aluminum
Small design adjustments often cut cost and lead time. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed 5754 Aluminum. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Press Brake Forming Tolerances & Surface Finish
Formed 5754 Aluminum holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC Press Brake Forming 5754 Aluminum
5754 Aluminum parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Press Brake Forming 5754 Aluminum
Starting your project takes one email. Send your CAD or 2D drawing, the 5754 Aluminum grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for 5754 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming 5754 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 5754 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
5754 Aluminum in Other Processes
Related
Send the drawing, the 5754 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Press Brake Forming 5754 Aluminum?
We form 5754 Aluminum sheet and plate to your developed flat pattern and bend sequence.
What tolerances can you hold for CNC Press Brake Forming 5754 Aluminum?
Achievable tolerances for 5754 Aluminum forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
Does CNC Press Brake Forming 5754 Aluminum require dedicated tooling?
Most 5754 Aluminum forming work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Why is 5754 Aluminum a good choice for CNC Press Brake Forming?
5754 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Press Brake Forming. We tune the process to the alloy so the finished 5754 Aluminum forming part meets your dimensional and functional requirements.