VT machining provides CNC Polishing 630 Stainless Steel for customers who need accurate, repeatable 630 Stainless Steel components. The machinability of 630 Stainless Steel is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, so we set the operation up specifically for this grade.
CNC Polishing Capability for 630 Stainless Steel
- Austenitic/martensitic grades
- Corrosion resistant
- Tolerance to ±0.01 mm
- Typical hardness 70–200 HB (annealed)
630 Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining 630 Stainless Steel with CNC Polishing
The machinability of 630 Stainless Steel is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing. For CNC Polishing we select tooling, feeds, speeds and coolant to match, keeping the 630 Stainless Steel workpiece stable and the result accurate.
Because we machine 630 Stainless Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Polishing 630 Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Surface roughness | Ra 0.8 µm | Ra 0.05 µm |
| Edge break | 0.1–0.3 mm | 0.05 ±0.02 mm |
| Material removed | 0.02 mm | 0.005 mm |
| Bore roundness after honing | 0.005 mm | 0.002 mm |
| Cross-hatch angle | 45° ±10° | 45° ±5° |
| Cosmetic grade | uniform satin | mirror, no visible lines |
| Masking of datum faces | on request | standard |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
We complete 630 Stainless Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Polishing Tolerances & Surface Finish
Finishing brings 630 Stainless Steel to a defined roughness target — from a uniform satin to Ra values as low as 0.05 µm — with controlled, repeatable edge breaks.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Design Tips for CNC Polishing 630 Stainless Steel
A few design choices make a real difference to cost and quality. Telling us the target Ra, the cosmetic faces and any masking needs lets us finish 630 Stainless Steel efficiently without over-processing. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Polishing Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on 630 Stainless Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Why 630 Stainless Steel?
Specifying 630 Stainless Steel for CNC Polishing 630 Stainless Steel is usually about its properties: corrosion resistant, strong and hygienic. Tell us the condition you need and we machine to it.
Applications of CNC Polishing 630 Stainless Steel
CNC Polishing of 630 Stainless Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Polishing 630 Stainless Steel
Ordering 630 Stainless Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for 630 Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Polishing 630 Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 630 Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
630 Stainless Steel in Other Processes
Related
Send the drawing, the 630 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Polishing 630 Stainless Steel and how is it done?
CNC Polishing 630 Stainless Steel refers to cNC polishing refines surfaces to a smooth, reflective finish for cosmetic and functional needs. Applied to 630 Stainless Steel — corrosion resistant, strong and hygienic — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Can VT machining make custom 630 Stainless Steel parts to my drawing?
Yes. 630 Stainless Steel 630 Stainless Steel finishing is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Polishing on 630 Stainless Steel?
Our deburring leaves 630 Stainless Steel with a consistent, controlled edge break and burr-free surfaces.
What is the typical lead time and minimum order for CNC Polishing 630 Stainless Steel?
CNC Polishing prototypes for 630 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What surface finish is achievable on 630 Stainless Steel with CNC Polishing?
Our finishing processes refine 630 Stainless Steel surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
Does CNC Polishing 630 Stainless Steel require dedicated tooling?
Most 630 Stainless Steel finishing work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.