Need reliable CNC Lathe Machining SKD61 Tool Steel? VT machining machines SKD61 Tool Steel to tight tolerances and consistent quality. As a material, SKD61 Tool Steel is wear-resistant and hardenable for tooling; we adapt feeds, speeds and tooling to suit.
CNC Lathe Machining Capability for SKD61 Tool Steel
- Air/oil/water-hardening grades
- High wear resistance
- Hardenable to 58–64 HRC
- Tolerance to ±0.005 mm
SKD61 Tool Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining SKD61 Tool Steel with CNC Lathe Machining
The machinability of SKD61 Tool Steel is machined in the annealed state, then hardened; carbide tooling preferred. For CNC Lathe Machining we select tooling, feeds, speeds and coolant to match, keeping the SKD61 Tool Steel workpiece stable and the result accurate.
Because we machine SKD61 Tool Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Lathe Machining SKD61 Tool Steel
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Lathe Machining Tolerances & Surface Finish
Turned SKD61 Tool Steel holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Why SKD61 Tool Steel?
Specifying SKD61 Tool Steel for CNC Lathe Machining SKD61 Tool Steel is usually about its properties: wear-resistant and hardenable for tooling. Tell us the condition you need and we machine to it.
Design Tips for CNC Lathe Machining SKD61 Tool Steel
A few design choices make a real difference to cost and quality. Consistent diameters, standard thread forms and avoiding extremely long, slender features help SKD61 Tool Steel turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Lathe Machining Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on SKD61 Tool Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Secondary Operations & Finishing
We complete SKD61 Tool Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Applications of CNC Lathe Machining SKD61 Tool Steel
CNC Lathe Machining of SKD61 Tool Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Lathe Machining SKD61 Tool Steel
Ordering SKD61 Tool Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for SKD61 Tool Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Lathe Machining SKD61 Tool Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact SKD61 Tool Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
SKD61 Tool Steel in Other Processes
Related
Send the drawing, the SKD61 Tool Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Lathe Machining on SKD61 Tool Steel?
Machined SKD61 Tool Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What surface finish is achievable on SKD61 Tool Steel with CNC Lathe Machining?
Surface finish on SKD61 Tool Steel is controlled to your specification; we confirm the achievable Ra against your callout.
What material thickness or size range suits CNC Lathe Machining SKD61 Tool Steel?
Turned SKD61 Tool Steel parts are produced from bar or chuck stock across a wide diameter range.
What is the typical lead time and minimum order for CNC Lathe Machining SKD61 Tool Steel?
CNC Lathe Machining prototypes for SKD61 Tool Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What tolerances can you hold for CNC Lathe Machining SKD61 Tool Steel?
Achievable tolerances for SKD61 Tool Steel turning depend on the alloy, geometry and feature size. Turning holds diameter tolerances to around ±0.005 mm with concentricity within 0.01 mm. Exact figures are confirmed against your drawing callouts.
Can VT machining make custom SKD61 Tool Steel parts to my drawing?
Yes. SKD61 Tool Steel SKD61 Tool Steel turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.