VT machining offers CNC Laser Cutting for S275JR Steel (EN 10025 / 1.0044 / ~A36), typically supplied hot-rolled. Mid-strength European structural steel, yield ≥275 MPa.
CNC Laser Cutting Notes for S275JR Steel
Fibre-laser cutting of S275JR Steel sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of S275JR Steel weighs about 0.79 kg.
Process Data for CNC Laser Cutting S275JR Steel
| Max practical thickness (6 kW fibre) | 25 mm |
|---|---|
| Assist gas | Oxygen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.1 mm (≤6 mm), ±0.2 mm thicker |
Typical values for S275JR Steel, Hot-rolled; confirmed on the first part.
S275JR Steel Data Relevant to CNC Laser Cutting
| Equivalent designations | EN 10025 / 1.0044 / ~A36 |
|---|---|
| Key composition | C ≤0.21%, Mn ≤1.5% |
| Density | 7.85 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Steel
Finishing options, quality documentation and general cnc laser cutting guidance for all steel grades are on our CNC Laser Cutting Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting S275JR Steel
Send a STEP/IGES model or PDF drawing, confirm S275JR Steel and its condition (we usually see it supplied hot-rolled), the quantity, critical tolerances and any finish or certificate requirements.
S275JR Steel in Other Processes
Related
Send the drawing, the S275JR Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is S275JR Steel a good choice for CNC Laser Cutting?
S275JR Steel is strong, economical and widely available, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished S275JR Steel cutting part meets your dimensional and functional requirements.
Can VT machining make custom S275JR Steel parts to my drawing?
Yes. S275JR Steel cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Laser Cutting S275JR Steel and how is it done?
CNC Laser Cutting S275JR Steel refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to S275JR Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What tolerances can you hold for CNC Laser Cutting S275JR Steel?
Achievable tolerances for S275JR Steel cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.