VT machining specialises in CNC Laser Cutting C630 Aluminum Bronze. Because C630 Aluminum Bronze is high-strength and seawater-corrosion-resistant, and its machinability is moderate; tough, strong, corrosion-resistant, we plan each job around the grade to protect accuracy and surface quality.
CNC Laser Cutting Capability for C630 Aluminum Bronze
- High strength
- Seawater corrosion resistant
- Tolerance to ±0.01 mm
- Good fatigue strength
C630 Aluminum Bronze Material Data
| Density | 8.80 g/cm³ |
|---|---|
| Tensile strength | 240 MPa |
| Yield strength (0.2%) | 125 MPa |
| Hardness | 65 HB |
| Melting point | 855–980 °C |
| Thermal conductivity | 59 W/m·K |
| Thermal expansion | 18.0 ×10⁻⁶/K |
| Electrical conductivity | 12% |
| Machinability (C36000 = 100%) | 70% |
| Grades we run | C93200 SAE 660, C54400, C63000 aluminium bronze, C86300 manganese bronze |
Published typical values for C93200 (SAE 660). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Cast bearing bronze has porosity. On sealing faces we specify continuous-cast stock rather than sand-cast, because a pinhole in a bore face is not repairable.
Machining C630 Aluminum Bronze with CNC Laser Cutting
The machinability of C630 Aluminum Bronze is moderate; tough, strong, corrosion-resistant. For CNC Laser Cutting we select tooling, feeds, speeds and coolant to match, keeping the C630 Aluminum Bronze workpiece stable and the result accurate.
Because we machine C630 Aluminum Bronze regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Laser Cutting C630 Aluminum Bronze
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut C630 Aluminum Bronze holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Secondary Operations & Finishing
We complete C630 Aluminum Bronze components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Why C630 Aluminum Bronze?
Specifying C630 Aluminum Bronze for CNC Laser Cutting C630 Aluminum Bronze is usually about its properties: high-strength and seawater-corrosion-resistant. Tell us the condition you need and we machine to it.
CNC Laser Cutting Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on C630 Aluminum Bronze parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Design Tips for CNC Laser Cutting C630 Aluminum Bronze
A few design choices make a real difference to cost and quality. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on C630 Aluminum Bronze. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Laser Cutting C630 Aluminum Bronze
CNC Laser Cutting of C630 Aluminum Bronze supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Laser Cutting C630 Aluminum Bronze
Ordering C630 Aluminum Bronze parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for C630 Aluminum Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting C630 Aluminum Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C630 Aluminum Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C630 Aluminum Bronze in Other Processes
Related
Send the drawing, the C630 Aluminum Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Laser Cutting on C630 Aluminum Bronze?
Laser cutting leaves C630 Aluminum Bronze with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What is CNC Laser Cutting C630 Aluminum Bronze and how is it done?
CNC Laser Cutting C630 Aluminum Bronze refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to C630 Aluminum Bronze — high-strength and seawater-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What material thickness or size range suits CNC Laser Cutting C630 Aluminum Bronze?
Laser-cut C630 Aluminum Bronze thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What surface finish is achievable on C630 Aluminum Bronze with CNC Laser Cutting?
Laser cutting leaves a clean cut face on C630 Aluminum Bronze with a small heat-affected zone; most parts need little secondary finishing.
Does CNC Laser Cutting C630 Aluminum Bronze require dedicated tooling?
Most C630 Aluminum Bronze cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Laser Cutting C630 Aluminum Bronze?
Achievable tolerances for C630 Aluminum Bronze cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.