CNC Laser Cutting C623 Aluminum Bronze is part of VT machining's grade-specific capability. C623 Aluminum Bronze is high-strength and seawater-corrosion-resistant, and we combine controlled cutting with material-aware setup to produce parts that meet your specification.
CNC Laser Cutting Capability for C623 Aluminum Bronze
- High strength
- Seawater corrosion resistant
- Tolerance to ±0.01 mm
- Good fatigue strength
C623 Aluminum Bronze Material Data
| Density | 8.80 g/cm³ |
|---|---|
| Tensile strength | 240 MPa |
| Yield strength (0.2%) | 125 MPa |
| Hardness | 65 HB |
| Melting point | 855–980 °C |
| Thermal conductivity | 59 W/m·K |
| Thermal expansion | 18.0 ×10⁻⁶/K |
| Electrical conductivity | 12% |
| Machinability (C36000 = 100%) | 70% |
| Grades we run | C93200 SAE 660, C54400, C63000 aluminium bronze, C86300 manganese bronze |
Published typical values for C93200 (SAE 660). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Cast bearing bronze has porosity. On sealing faces we specify continuous-cast stock rather than sand-cast, because a pinhole in a bore face is not repairable.
Machining C623 Aluminum Bronze with CNC Laser Cutting
The machinability of C623 Aluminum Bronze is moderate; tough, strong, corrosion-resistant. For CNC Laser Cutting we select tooling, feeds, speeds and coolant to match, keeping the C623 Aluminum Bronze workpiece stable and the result accurate.
Because we machine C623 Aluminum Bronze regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Laser Cutting C623 Aluminum Bronze
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why C623 Aluminum Bronze?
Specifying C623 Aluminum Bronze for CNC Laser Cutting C623 Aluminum Bronze is usually about its properties: high-strength and seawater-corrosion-resistant. Tell us the condition you need and we machine to it.
Secondary Operations & Finishing
We complete C623 Aluminum Bronze components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Design Tips for CNC Laser Cutting C623 Aluminum Bronze
A few design choices make a real difference to cost and quality. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on C623 Aluminum Bronze. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Laser Cutting Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on C623 Aluminum Bronze parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut C623 Aluminum Bronze holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Laser Cutting C623 Aluminum Bronze
CNC Laser Cutting of C623 Aluminum Bronze supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Laser Cutting C623 Aluminum Bronze
Ordering C623 Aluminum Bronze parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for C623 Aluminum Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting C623 Aluminum Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C623 Aluminum Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C623 Aluminum Bronze in Other Processes
Related
Send the drawing, the C623 Aluminum Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Laser Cutting C623 Aluminum Bronze?
Laser-cut C623 Aluminum Bronze thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What is the typical lead time and minimum order for CNC Laser Cutting C623 Aluminum Bronze?
CNC Laser Cutting prototypes for C623 Aluminum Bronze can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is C623 Aluminum Bronze a good choice for CNC Laser Cutting?
C623 Aluminum Bronze is high-strength and seawater-corrosion-resistant, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished C623 Aluminum Bronze cutting part meets your dimensional and functional requirements.
What surface finish is achievable on C623 Aluminum Bronze with CNC Laser Cutting?
Laser cutting leaves a clean cut face on C623 Aluminum Bronze with a small heat-affected zone; most parts need little secondary finishing.
What is CNC Laser Cutting C623 Aluminum Bronze and how is it done?
CNC Laser Cutting C623 Aluminum Bronze refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to C623 Aluminum Bronze — high-strength and seawater-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Laser Cutting C623 Aluminum Bronze require dedicated tooling?
Most C623 Aluminum Bronze cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.