VT machining specialises in CNC Laser Cutting 9310 Alloy Steel. Because 9310 Alloy Steel is high-strength and hardenable, and its machinability is good in annealed condition; machined soft then heat-treated to final hardness, we plan each job around the grade to protect accuracy and surface quality.
CNC Laser Cutting Capability for 9310 Alloy Steel
- Cr-Mo / Ni-Cr-Mo grades
- High strength & hardenability
- Tolerance to ±0.01 mm
- Heat-treatable to 30–55 HRC
9310 Alloy Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 655–1020 MPa |
| Yield strength (0.2%) | 415–900 MPa |
| Hardness | 197–302 HB |
| Melting point | 1416 °C |
| Thermal conductivity | 42.6 W/m·K |
| Thermal expansion | 12.3 ×10⁻⁶/K |
| Electrical conductivity | 8% |
| Machinability (C36000 = 100%) | 65% (annealed) |
| Grades we run | 4140, 4340, 8620, 20CrMnTi, 42CrMo4, 20MnCr5 |
Published typical values for 4140 (Q&T). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat treatment moves the part. Anything held tighter than ±0.02 mm is machined soft, hardened, then ground or hard-turned to final size.
Machining 9310 Alloy Steel with CNC Laser Cutting
9310 Alloy Steel behaves predictably under CNC Laser Cutting once parameters are dialled in: machinability is good in annealed condition; machined soft then heat-treated to final hardness, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 9310 Alloy Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Laser Cutting 9310 Alloy Steel
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why 9310 Alloy Steel?
9310 Alloy Steel is chosen when a part needs what this grade offers — it is high-strength and hardenable. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut 9310 Alloy Steel holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Laser Cutting 9310 Alloy Steel
We are happy to suggest design tweaks that improve manufacturability. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on 9310 Alloy Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Laser Cutting Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 9310 Alloy Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Secondary Operations & Finishing
Finished 9310 Alloy Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Applications of CNC Laser Cutting 9310 Alloy Steel
Customers order CNC Laser Cutting 9310 Alloy Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Laser Cutting 9310 Alloy Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 9310 Alloy Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Through hardening | — | 30–55 HRC, ground afterwards for tight sizes |
| Case hardening (carburise) | 0.3–1.2 mm case | 58–62 HRC surface, tough core |
| Nitride | 0.1–0.5 mm | 900–1100 HV, minimal distortion |
| Black oxide | 1–2 µm | Cosmetic + light corrosion protection |
| Zinc / nickel plate | 5–25 µm | Corrosion protection |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting 9310 Alloy Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 9310 Alloy Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
9310 Alloy Steel in Other Processes
Related
Send the drawing, the 9310 Alloy Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Which industries use CNC Laser Cutting 9310 Alloy Steel parts?
CNC Laser Cutting 9310 Alloy Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise 9310 Alloy Steel components are required.
Why is 9310 Alloy Steel a good choice for CNC Laser Cutting?
9310 Alloy Steel is high-strength and hardenable, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished 9310 Alloy Steel cutting part meets your dimensional and functional requirements.
What surface finish is achievable on 9310 Alloy Steel with CNC Laser Cutting?
Laser cutting leaves a clean cut face on 9310 Alloy Steel with a small heat-affected zone; most parts need little secondary finishing.
What material thickness or size range suits CNC Laser Cutting 9310 Alloy Steel?
Laser-cut 9310 Alloy Steel thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
How clean are the edges produced by CNC Laser Cutting on 9310 Alloy Steel?
Laser cutting leaves 9310 Alloy Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.