VT machining offers CNC Laser Cutting for 8620 Alloy Steel (UNS G86200 / 20NiCrMo2-2 / SNCM220), typically supplied annealed, then carburised. Carburising steel: tough core with hard case.
CNC Laser Cutting Notes for 8620 Alloy Steel
Fibre-laser cutting of 8620 Alloy Steel sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of 8620 Alloy Steel weighs about 0.79 kg.
Process Data for CNC Laser Cutting 8620 Alloy Steel
| Max practical thickness (6 kW fibre) | 25 mm |
|---|---|
| Assist gas | Oxygen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.1 mm (≤6 mm), ±0.2 mm thicker |
Typical values for 8620 Alloy Steel, Annealed, then carburised; confirmed on the first part.
8620 Alloy Steel Data Relevant to CNC Laser Cutting
| Equivalent designations | UNS G86200 / 20NiCrMo2-2 / SNCM220 |
|---|---|
| Key composition | C 0.18-0.23%, Ni 0.4-0.7%, Cr 0.4-0.6%, Mo |
| Density | 7.85 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Alloy Steel
Finishing options, quality documentation and general cnc laser cutting guidance for all alloy steel grades are on our CNC Laser Cutting Alloy Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting 8620 Alloy Steel
Send a STEP/IGES model or PDF drawing, confirm 8620 Alloy Steel and its condition (we usually see it supplied annealed, then carburised), the quantity, critical tolerances and any finish or certificate requirements.
8620 Alloy Steel in Other Processes
Related
Send the drawing, the 8620 Alloy Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom 8620 Alloy Steel parts to my drawing?
Yes. 8620 Alloy Steel cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Laser Cutting on 8620 Alloy Steel?
Laser cutting leaves 8620 Alloy Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What surface finish is achievable on 8620 Alloy Steel with CNC Laser Cutting?
Laser cutting leaves a clean cut face on 8620 Alloy Steel with a small heat-affected zone; most parts need little secondary finishing.
Why is 8620 Alloy Steel a good choice for CNC Laser Cutting?
8620 Alloy Steel is high-strength and hardenable, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished 8620 Alloy Steel cutting part meets your dimensional and functional requirements.
