Need reliable CNC Laser Cutting 7050 Aluminum? VT machining machines 7050 Aluminum to tight tolerances and consistent quality. As a material, 7050 Aluminum is lightweight with excellent machinability; we adapt feeds, speeds and tooling to suit.
CNC Laser Cutting Capability for 7050 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
7050 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining 7050 Aluminum with CNC Laser Cutting
The machinability of 7050 Aluminum is excellent; high cutting speeds and superb finishes achievable. For CNC Laser Cutting we select tooling, feeds, speeds and coolant to match, keeping the 7050 Aluminum workpiece stable and the result accurate.
Because we machine 7050 Aluminum regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Laser Cutting 7050 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
We complete 7050 Aluminum components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Why 7050 Aluminum?
Specifying 7050 Aluminum for CNC Laser Cutting 7050 Aluminum is usually about its properties: lightweight with excellent machinability. Tell us the condition you need and we machine to it.
CNC Laser Cutting Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on 7050 Aluminum parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Design Tips for CNC Laser Cutting 7050 Aluminum
A few design choices make a real difference to cost and quality. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on 7050 Aluminum. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Laser Cutting Tolerances & Surface Finish
Laser-cut 7050 Aluminum holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Laser Cutting 7050 Aluminum
CNC Laser Cutting of 7050 Aluminum supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Laser Cutting 7050 Aluminum
Ordering 7050 Aluminum parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for 7050 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Laser Cutting 7050 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 7050 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
7050 Aluminum in Other Processes
Related
Send the drawing, the 7050 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is 7050 Aluminum a good choice for CNC Laser Cutting?
7050 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Laser Cutting. We tune the process to the alloy so the finished 7050 Aluminum cutting part meets your dimensional and functional requirements.
How clean are the edges produced by CNC Laser Cutting on 7050 Aluminum?
Laser cutting leaves 7050 Aluminum with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What tolerances can you hold for CNC Laser Cutting 7050 Aluminum?
Achievable tolerances for 7050 Aluminum cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC Laser Cutting 7050 Aluminum?
CNC Laser Cutting prototypes for 7050 Aluminum can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What material thickness or size range suits CNC Laser Cutting 7050 Aluminum?
Laser-cut 7050 Aluminum thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
Can VT machining make custom 7050 Aluminum parts to my drawing?
Yes. 7050 Aluminum 7050 Aluminum cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.