Need reliable CNC Honing SECC Steel? VT machining machines SECC Steel to tight tolerances and consistent quality. As a material, SECC Steel is strong, economical and widely available; we adapt feeds, speeds and tooling to suit.
CNC Honing Capability for SECC Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
SECC Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining SECC Steel with CNC Honing
SECC Steel behaves predictably under CNC Honing once parameters are dialled in: machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of SECC Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Honing SECC Steel
| Feature | Standard | Precision |
|---|---|---|
| Surface roughness | Ra 0.8 µm | Ra 0.05 µm |
| Edge break | 0.1–0.3 mm | 0.05 ±0.02 mm |
| Material removed | 0.02 mm | 0.005 mm |
| Bore roundness after honing | 0.005 mm | 0.002 mm |
| Cross-hatch angle | 45° ±10° | 45° ±5° |
| Cosmetic grade | uniform satin | mirror, no visible lines |
| Masking of datum faces | on request | standard |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why SECC Steel?
SECC Steel is chosen when a part needs what this grade offers — it is strong, economical and widely available. We confirm the grade and any temper or heat-treat condition with you before machining.
Design Tips for CNC Honing SECC Steel
We are happy to suggest design tweaks that improve manufacturability. Telling us the target Ra, the cosmetic faces and any masking needs lets us finish SECC Steel efficiently without over-processing. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Finished SECC Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Honing Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every SECC Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
CNC Honing Tolerances & Surface Finish
Finishing brings SECC Steel to a defined roughness target — from a uniform satin to Ra values as low as 0.05 µm — with controlled, repeatable edge breaks.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Honing SECC Steel
Customers order CNC Honing SECC Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Honing SECC Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for SECC Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Honing SECC Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact SECC Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
SECC Steel in Other Processes
Related
Send the drawing, the SECC Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Honing SECC Steel?
We machine SECC Steel across a broad size range; share your part envelope for confirmation.
What is the typical lead time and minimum order for CNC Honing SECC Steel?
CNC Honing prototypes for SECC Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What surface finish is achievable on SECC Steel with CNC Honing?
Our finishing processes refine SECC Steel surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
What tolerances can you hold for CNC Honing SECC Steel?
Achievable tolerances for SECC Steel finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Honing on SECC Steel?
Our deburring leaves SECC Steel with a consistent, controlled edge break and burr-free surfaces.