CNC Gear Hobbing 4142 Alloy Steel is part of VT machining's grade-specific capability. 4142 Alloy Steel is high-strength and hardenable, and we combine controlled gear cutting with material-aware setup to produce parts that meet your specification.
CNC Gear Hobbing Capability for 4142 Alloy Steel
- Cr-Mo / Ni-Cr-Mo grades
- High strength & hardenability
- Tolerance to ±0.01 mm
- Heat-treatable to 30–55 HRC
4142 Alloy Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 655–1020 MPa |
| Yield strength (0.2%) | 415–900 MPa |
| Hardness | 197–302 HB |
| Melting point | 1416 °C |
| Thermal conductivity | 42.6 W/m·K |
| Thermal expansion | 12.3 ×10⁻⁶/K |
| Electrical conductivity | 8% |
| Machinability (C36000 = 100%) | 65% (annealed) |
| Grades we run | 4140, 4340, 8620, 20CrMnTi, 42CrMo4, 20MnCr5 |
Published typical values for 4140 (Q&T). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat treatment moves the part. Anything held tighter than ±0.02 mm is machined soft, hardened, then ground or hard-turned to final size.
Machining 4142 Alloy Steel with CNC Gear Hobbing
4142 Alloy Steel behaves predictably under CNC Gear Hobbing once parameters are dialled in: machinability is good in annealed condition; machined soft then heat-treated to final hardness, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of 4142 Alloy Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Gear Hobbing 4142 Alloy Steel
| Feature | Standard | Precision |
|---|---|---|
| Accuracy class | DIN 8 / AGMA 10 | DIN 6 / AGMA 12 |
| Profile deviation | 0.020 mm | 0.008 mm |
| Lead deviation | 0.020 mm | 0.008 mm |
| Pitch deviation (cumulative) | 0.040 mm | 0.015 mm |
| Runout | 0.030 mm | 0.010 mm |
| Tooth surface finish | Ra 1.6 µm | Ra 0.4 µm (ground) |
| Module range | m0.5–m8 | m1–m6 |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Gear Hobbing 4142 Alloy Steel
We are happy to suggest design tweaks that improve manufacturability. Providing complete gear data (module, pressure angle, profile shift, quality class) lets us produce 4142 Alloy Steel gears right the first time. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Gear Hobbing Tolerances & Surface Finish
Gear features are produced to a specified DIN/AGMA accuracy class, with profile and lead controlled for quiet, durable running under load.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished 4142 Alloy Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Why 4142 Alloy Steel?
4142 Alloy Steel is chosen when a part needs what this grade offers — it is high-strength and hardenable. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Gear Hobbing Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every 4142 Alloy Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Applications of CNC Gear Hobbing 4142 Alloy Steel
Customers order CNC Gear Hobbing 4142 Alloy Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Gear Hobbing 4142 Alloy Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for 4142 Alloy Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Through hardening | — | 30–55 HRC, ground afterwards for tight sizes |
| Case hardening (carburise) | 0.3–1.2 mm case | 58–62 HRC surface, tough core |
| Nitride | 0.1–0.5 mm | 900–1100 HV, minimal distortion |
| Black oxide | 1–2 µm | Cosmetic + light corrosion protection |
| Zinc / nickel plate | 5–25 µm | Corrosion protection |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Gear Hobbing 4142 Alloy Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 4142 Alloy Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
4142 Alloy Steel in Other Processes
Related
Send the drawing, the 4142 Alloy Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on 4142 Alloy Steel with CNC Gear Hobbing?
Surface finish on 4142 Alloy Steel is controlled to your specification; we confirm the achievable Ra against your callout.
Can VT machining make custom 4142 Alloy Steel parts to my drawing?
Yes. 4142 Alloy Steel 4142 Alloy Steel gear cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Gear Hobbing 4142 Alloy Steel and how is it done?
CNC Gear Hobbing 4142 Alloy Steel refers to gear hobbing generates gear teeth with a rotating hob synchronized to the workpiece. Applied to 4142 Alloy Steel — high-strength and hardenable — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What tolerances can you hold for CNC Gear Hobbing 4142 Alloy Steel?
Achievable tolerances for 4142 Alloy Steel gear cutting depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
Which industries use CNC Gear Hobbing 4142 Alloy Steel parts?
CNC Gear Hobbing 4142 Alloy Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise 4142 Alloy Steel components are required.