CNC Gear Grinding SKD11 Tool Steel is part of VT machining's grade-specific capability. SKD11 Tool Steel is wear-resistant and hardenable for tooling, and we combine controlled gear cutting with material-aware setup to produce parts that meet your specification.
CNC Gear Grinding Capability for SKD11 Tool Steel
- Air/oil/water-hardening grades
- High wear resistance
- Hardenable to 58–64 HRC
- Tolerance to ±0.005 mm
SKD11 Tool Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining SKD11 Tool Steel with CNC Gear Grinding
SKD11 Tool Steel behaves predictably under CNC Gear Grinding once parameters are dialled in: machinability is machined in the annealed state, then hardened; carbide tooling preferred, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of SKD11 Tool Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Gear Grinding SKD11 Tool Steel
| Feature | Standard | Precision |
|---|---|---|
| Accuracy class | DIN 8 / AGMA 10 | DIN 6 / AGMA 12 |
| Profile deviation | 0.020 mm | 0.008 mm |
| Lead deviation | 0.020 mm | 0.008 mm |
| Pitch deviation (cumulative) | 0.040 mm | 0.015 mm |
| Runout | 0.030 mm | 0.010 mm |
| Tooth surface finish | Ra 1.6 µm | Ra 0.4 µm (ground) |
| Module range | m0.5–m8 | m1–m6 |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Gear Grinding SKD11 Tool Steel
We are happy to suggest design tweaks that improve manufacturability. Providing complete gear data (module, pressure angle, profile shift, quality class) lets us produce SKD11 Tool Steel gears right the first time. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Finished SKD11 Tool Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Gear Grinding Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every SKD11 Tool Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why SKD11 Tool Steel?
SKD11 Tool Steel is chosen when a part needs what this grade offers — it is wear-resistant and hardenable for tooling. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Gear Grinding Tolerances & Surface Finish
Gear features are produced to a specified DIN/AGMA accuracy class, with profile and lead controlled for quiet, durable running under load.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Gear Grinding SKD11 Tool Steel
Customers order CNC Gear Grinding SKD11 Tool Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Gear Grinding SKD11 Tool Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for SKD11 Tool Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Gear Grinding SKD11 Tool Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact SKD11 Tool Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
SKD11 Tool Steel in Other Processes
Related
Send the drawing, the SKD11 Tool Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on SKD11 Tool Steel with CNC Gear Grinding?
Surface finish on SKD11 Tool Steel is controlled to your specification; we confirm the achievable Ra against your callout.
Can VT machining make custom SKD11 Tool Steel parts to my drawing?
Yes. SKD11 Tool Steel SKD11 Tool Steel gear cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Gear Grinding SKD11 Tool Steel?
Achievable tolerances for SKD11 Tool Steel gear cutting depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
Which industries use CNC Gear Grinding SKD11 Tool Steel parts?
CNC Gear Grinding SKD11 Tool Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise SKD11 Tool Steel components are required.
How clean are the edges produced by CNC Gear Grinding on SKD11 Tool Steel?
Machined SKD11 Tool Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.