VT machining offers CNC EDM Drilling for 301 Stainless Steel (UNS S30100 / 1.4310 / SUS301), typically supplied annealed or temper-rolled (1/4-full hard). Lower Ni than 304 lets it cold-work to spring tempers; strongest work-hardening of the 300 series.
CNC EDM Drilling Notes for 301 Stainless Steel
EDM drilling produces small, deep holes and wire start holes in 301 Stainless Steel where a twist drill would wander or break.
Process Data for CNC EDM Drilling 301 Stainless Steel
| Hole diameter range | Ø0.3-3.0 mm |
|---|---|
| Max depth-to-diameter | up to ~100:1 |
| Drilling speed, Ø1 mm | ~22 mm/min |
Typical values for 301 Stainless Steel, Annealed or temper-rolled (1/4-full hard); confirmed on the first part.
Full material data for 301 Stainless Steel (UNS S30100 / 1.4310 / SUS301) is on the CNC Wire EDM 301 Stainless Steel page.
More on CNC EDM Drilling Stainless Steel
Finishing options, quality documentation and general cnc edm drilling guidance for all stainless steel grades are on our CNC EDM Drilling Stainless Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC EDM Drilling 301 Stainless Steel
Send a STEP/IGES model or PDF drawing, confirm 301 Stainless Steel and its condition (we usually see it supplied annealed or temper-rolled (1/4-full hard)), the quantity, critical tolerances and any finish or certificate requirements.
301 Stainless Steel in Other Processes
Related
Send the drawing, the 301 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is 301 Stainless Steel a good choice for CNC EDM Drilling?
301 Stainless Steel is corrosion resistant, strong and hygienic, which makes it well suited to CNC EDM Drilling. We tune the process to the alloy so the finished 301 Stainless Steel EDM machining part meets your dimensional and functional requirements.
What tolerances can you hold for CNC EDM Drilling 301 Stainless Steel?
Achievable tolerances for 301 Stainless Steel EDM machining depend on the alloy, geometry and feature size. EDM holds tolerances to around ±0.002 mm with no cutting force on the part. Exact figures are confirmed against your drawing callouts.
Can you EDM-machine hardened 301 Stainless Steel?
Yes. EDM removes material by electrical discharge rather than cutting force, so hardened and difficult 301 Stainless Steel can be machined to fine detail and tight tolerance without distortion.
What is the typical lead time and minimum order for CNC EDM Drilling 301 Stainless Steel?
CNC EDM Drilling prototypes for 301 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Does CNC EDM Drilling 301 Stainless Steel require dedicated tooling?
Wire EDM needs no shaped tooling; sinker EDM uses a shaped electrode we produce in-house for your cavity.
