Looking for reliable CNC Drilling Copper? VT machining manufactures Copper parts to tight tolerances and consistent quality. Copper is excellent electrical and thermal conductivity, so the process is set up specifically for the material.
Starting Parameters for CNC Drilling Copper
| Cutting speed (carbide) | 85-165 m/min |
|---|---|
| Feed, Ø8 mm drill | 0.064-0.175 mm/rev |
| Spindle speed, Ø8 mm | 3380-6570 rpm |
| Peck depth | 1-3 × D |
| Insert / tool class | ISO N — sharp, polished, uncoated or DLC |
| Coolant | Emulsion; very sharp polished tools to avoid smearing |
Shown for C110 Copper, the most common Copper grade we see for CNC Drilling. Starting values for C110 Copper, Annealed or H02; optimised on the first article.
CNC Drilling Capability for Copper
- Hole position ±0.05 mm
- Depth-to-diameter to 10:1+
- Peck and through-coolant cycles
- Spot, drill, ream sequencing
Copper material properties, finishing options and grade notes are on our CNC Milling Copper page.
How CNC Drilling Copper Works
Rotating multi-flute cutters remove material as the Copper workpiece is driven through programmed tool paths on 3-, 4- or 5-axis machining centres. Climb milling, step-over and depth-of-cut are set so chip load stays in the ideal band for the alloy.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Drilling Copper
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Drilling Copper
A few design choices make a real difference to cost and quality. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Drilling Tolerances & Surface Finish
For CNC Drilling, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Drilling Copper
CNC Drilling of Copper supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
Typical Copper Parts for CNC Drilling
Illustrative examples of CNC Drilling Copper parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Robot end-effector bracket
- Material
- Copper
- Size
- 180 × 90 × 30 mm
- Key callouts
- Bore pair concentric within 0.02 mm, weight reduction pockets
- Batch
- 120 pcs
Pockets ganged so wall thickness never drops below 2 mm at the load path.
Sensor housing
- Material
- Copper
- Size
- 86 × 54 × 22 mm
- Key callouts
- Pocket depth ±0.02 mm, bore H7, flatness 0.015 mm
- Batch
- 250 pcs / quarter
O-ring groove finished in the same setup as the sealing face so the two stay parallel.
Optical mount plate
- Material
- Copper
- Size
- 160 × 160 × 12 mm
- Key callouts
- Hole pattern true position ±0.02 mm, flatness 0.01 mm
- Batch
- 40 pcs
Roughed, stress-relieved overnight, then finished — the plate is too thin to hold flatness in one hit.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Drilling Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Drilling
Other Processes for Copper
Send the drawing, the Copper grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
Why is Copper a good choice for CNC Drilling?
Copper is excellent electrical and thermal conductivity, which makes it well suited to CNC Drilling. We tune the process to the alloy so the finished Copper machining part meets your dimensional and functional requirements.
What is the typical lead time and minimum order for CNC Drilling Copper?
CNC Drilling prototypes for Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Can VT machining make custom Copper parts to my drawing?
Yes. Copper machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What surface finish is achievable on Copper with CNC Drilling?
Surface finish on Copper is controlled to your specification; we confirm the achievable Ra against your callout.
What tolerances can you hold for CNC Drilling Copper?
Achievable tolerances for Copper machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Drilling Copper?
We machine Copper across a broad size range; share your part envelope for confirmation.