VT machining offers CNC Deburring for C17510 Beryllium Copper (UNS C17510 / CuNi2Be / Class 3), typically supplied aged (TF00/HT). Lower strength than C17200 but higher conductivity (~45-60% IACS).
CNC Deburring Notes for C17510 Beryllium Copper
Burrs on C17510 Beryllium Copper are removed by vibratory, brush or manual deburring to the edge-break you specify.
Process Data for CNC Deburring C17510 Beryllium Copper
| Recommended method | Brush / tumbling with non-ferrous media |
|---|---|
| Typical edge break | 0.1-0.3 mm or per drawing |
Typical values for C17510 Beryllium Copper, Aged (TF00/HT); confirmed on the first part.
Full material data for C17510 Beryllium Copper (UNS C17510 / CuNi2Be / Class 3) is on the CNC Polishing C17510 Beryllium Copper page.
More on CNC Deburring Beryllium Copper
Finishing options, quality documentation and general cnc deburring guidance for all beryllium copper grades are on our CNC Deburring Beryllium Copper page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Deburring C17510 Beryllium Copper
Send a STEP/IGES model or PDF drawing, confirm C17510 Beryllium Copper and its condition (we usually see it supplied aged (TF00/HT)), the quantity, critical tolerances and any finish or certificate requirements.
C17510 Beryllium Copper in Other Processes
Related
Send the drawing, the C17510 Beryllium Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Deburring C17510 Beryllium Copper?
CNC Deburring prototypes for C17510 Beryllium Copper can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What is CNC Deburring C17510 Beryllium Copper and how is it done?
CNC Deburring C17510 Beryllium Copper refers to automated deburring removes sharp edges and burrs for safe handling and consistent edge quality. Applied to C17510 Beryllium Copper — high-strength, conductive and non-sparking — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What surface finish is achievable on C17510 Beryllium Copper with CNC Deburring?
Our finishing processes refine C17510 Beryllium Copper surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
Can VT machining make custom C17510 Beryllium Copper parts to my drawing?
Yes. C17510 Beryllium Copper finishing is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Deburring C17510 Beryllium Copper?
Achievable tolerances for C17510 Beryllium Copper finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
