VT machining offers CNC Deburring for C122 Copper (UNS C12200 / DHP / Cu-DHP), typically supplied annealed or H55. Phosphorus-deoxidised; brazes and welds well but lower conductivity (~85% IACS).
CNC Deburring Notes for C122 Copper
C122 Copper forms tough, rolled burrs, so we deburr with a combination of tooling and vibratory or brush finishing.
Process Data for CNC Deburring C122 Copper
| Recommended method | Brush / tumbling with non-ferrous media |
|---|---|
| Typical edge break | 0.1-0.3 mm or per drawing |
Typical values for C122 Copper, Annealed or H55; confirmed on the first part.
Full material data for C122 Copper (UNS C12200 / DHP / Cu-DHP) is on the CNC Polishing C122 Copper page.
More on CNC Deburring Copper
Finishing options, quality documentation and general cnc deburring guidance for all copper grades are on our CNC Deburring Copper page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Deburring C122 Copper
Send a STEP/IGES model or PDF drawing, confirm C122 Copper and its condition (we usually see it supplied annealed or H55), the quantity, critical tolerances and any finish or certificate requirements.
C122 Copper in Other Processes
Related
Send the drawing, the C122 Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What tolerances can you hold for CNC Deburring C122 Copper?
Achievable tolerances for C122 Copper finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
Does CNC Deburring C122 Copper require dedicated tooling?
Most C122 Copper finishing work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What surface finish is achievable on C122 Copper with CNC Deburring?
Our finishing processes refine C122 Copper surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
Why is C122 Copper a good choice for CNC Deburring?
C122 Copper is excellent electrical and thermal conductivity, which makes it well suited to CNC Deburring. We tune the process to the alloy so the finished C122 Copper finishing part meets your dimensional and functional requirements.
