VT machining offers CNC Deburring for Alloy 42 (UNS K94100 / ASTM F30 / 4J42), typically supplied annealed. Lower-cost Fe-Ni with expansion close to silicon and ceramics.
CNC Deburring Notes for Alloy 42
Alloy 42 forms tough, rolled burrs, so we deburr with a combination of tooling and vibratory or brush finishing.
Process Data for CNC Deburring Alloy 42
| Recommended method | Tool-path chamfer + vibratory or electropolish |
|---|---|
| Typical edge break | 0.1-0.3 mm or per drawing |
Typical values for Alloy 42, Annealed; confirmed on the first part.
Full material data for Alloy 42 (UNS K94100 / ASTM F30 / 4J42) is on the CNC Polishing Alloy 42 page.
More on CNC Deburring Kovar
Finishing options, quality documentation and general cnc deburring guidance for all kovar grades are on our CNC Deburring Kovar page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Deburring Alloy 42
Send a STEP/IGES model or PDF drawing, confirm Alloy 42 and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.
Alloy 42 in Other Processes
Related
Send the drawing, the Alloy 42 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on Alloy 42 with CNC Deburring?
Our finishing processes refine Alloy 42 surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
Which industries use CNC Deburring Alloy 42 parts?
CNC Deburring Alloy 42 parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Alloy 42 components are required.
What is CNC Deburring Alloy 42 and how is it done?
CNC Deburring Alloy 42 refers to automated deburring removes sharp edges and burrs for safe handling and consistent edge quality. Applied to Alloy 42 — matched/low thermal expansion for sealing — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Deburring Alloy 42 require dedicated tooling?
Most Alloy 42 finishing work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What tolerances can you hold for CNC Deburring Alloy 42?
Achievable tolerances for Alloy 42 finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
