VT machining provides CNC Broaching P20 Mold Steel for customers who need accurate, repeatable P20 Mold Steel components. The machinability of P20 Mold Steel is pre-hardened or machined-then-hardened; polishes to high finish for molds, so we set the operation up specifically for this grade.
CNC Broaching Capability for P20 Mold Steel
- Mold-grade cleanliness
- Polishable to mirror finish
- Hardenable to 48–54 HRC
- Tolerance to ±0.005 mm
Machining P20 Mold Steel with CNC Broaching
P20 Mold Steel behaves predictably under CNC Broaching once parameters are dialled in: machinability is pre-hardened or machined-then-hardened; polishes to high finish for molds, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of P20 Mold Steel run consistently from one batch to the next.
Secondary Operations & Finishing
Finished P20 Mold Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Broaching P20 Mold Steel
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in P20 Mold Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Broaching Tolerances & Surface Finish
For CNC Broaching, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
CNC Broaching Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every P20 Mold Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why P20 Mold Steel?
P20 Mold Steel is chosen when a part needs what this grade offers — it is mold-grade, polishable and hardenable. We confirm the grade and any temper or heat-treat condition with you before machining.
Applications of CNC Broaching P20 Mold Steel
Customers order CNC Broaching P20 Mold Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Broaching P20 Mold Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
P20 Mold Steel in Other Processes
Related
Need CNC Broaching P20 Mold Steel for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Broaching P20 Mold Steel?
We machine P20 Mold Steel across a broad size range; share your part envelope for confirmation.
Why is P20 Mold Steel a good choice for CNC Broaching?
P20 Mold Steel is mold-grade, polishable and hardenable, which makes it well suited to CNC Broaching. We tune the process to the alloy so the finished P20 Mold Steel machining part meets your dimensional and functional requirements.
Does CNC Broaching P20 Mold Steel require dedicated tooling?
Most P20 Mold Steel machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
How clean are the edges produced by CNC Broaching on P20 Mold Steel?
Machined P20 Mold Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Can VT machining make custom P20 Mold Steel parts to my drawing?
Yes. P20 Mold Steel P20 Mold Steel machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.