VT machining offers CNC Bending for Inconel 600 (UNS N06600 / 2.4816), typically supplied annealed. Non-hardenable Ni-Cr alloy for oxidation and chloride-SCC resistance.
CNC Bending Notes for Inconel 600
Inconel 600 bends to a tight inside radius (about 1× thickness) in this condition.
For estimating, a 100 × 100 × 10 mm block of Inconel 600 weighs about 0.85 kg.
Process Data for CNC Bending Inconel 600
| Minimum inside bend radius | ~2 × t (across the grain) |
|---|---|
| Press force, 2 mm sheet, V16 die | ~22.4 t per metre |
| Typical springback at 90° | 1-2° |
| Angle tolerance | ±0.5° (CNC back-gauge, angle measurement on first part) |
Typical values for Inconel 600, Annealed; confirmed on the first part.
Inconel 600 Data Relevant to CNC Bending
| Equivalent designations | UNS N06600 / 2.4816 |
|---|---|
| Typical supply condition | Annealed |
| Hardness (typical) | ~75-90 HRB |
| Tensile strength | ~620 MPa |
Typical values; we work to your drawing and mill certificate.
More on CNC Bending Inconel
Finishing options, quality documentation and general cnc bending guidance for all inconel grades are on our CNC Bending Inconel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Bending Inconel 600
Send a STEP/IGES model or PDF drawing, confirm Inconel 600 and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.
Inconel 600 in Other Processes
Related
Send the drawing, the Inconel 600 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Bending Inconel 600?
We form Inconel 600 sheet and plate to your developed flat pattern and bend sequence.
How clean are the edges produced by CNC Bending on Inconel 600?
Machined Inconel 600 edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is CNC Bending Inconel 600 and how is it done?
CNC Bending Inconel 600 refers to cNC bending forms sheet metal to precise angles using a programmed press brake and back-gauge. Applied to Inconel 600 — high-temperature strength and oxidation resistance — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Can VT machining make custom Inconel 600 parts to my drawing?
Yes. Inconel 600 forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What surface finish is achievable on Inconel 600 with CNC Bending?
Surface finish on Inconel 600 is controlled to your specification; we confirm the achievable Ra against your callout.