Need reliable CNC 4-Axis Machining C268 Brass? VT machining machines C268 Brass to tight tolerances and consistent quality. As a material, C268 Brass is free-machining with good conductivity; we adapt feeds, speeds and tooling to suit.
CNC 4-Axis Machining Capability for C268 Brass
- Free-machining
- Good conductivity
- Attractive finish
- Tolerance to ±0.01 mm
C268 Brass Material Data
| Density | 8.50 g/cm³ |
|---|---|
| Tensile strength | 340–470 MPa |
| Yield strength (0.2%) | 125–310 MPa |
| Hardness | 78–130 HB |
| Melting point | 885–900 °C |
| Thermal conductivity | 115 W/m·K |
| Thermal expansion | 20.5 ×10⁻⁶/K |
| Electrical conductivity | 26% |
| Machinability (C36000 = 100%) | 100% (the benchmark) |
| Grades we run | C36000 free-cutting, C37700 forging, C26000 cartridge, C46400 naval |
Published typical values for C36000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Nothing much — this is the easiest metal in the shop. Worth asking about if a copper or bronze part is cost-driven rather than conductivity-driven.
Machining C268 Brass with CNC 4-Axis Machining
When machining C268 Brass, machinability is excellent (free-machining); fast speeds, clean finish. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for C268 Brass mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC 4-Axis Machining C268 Brass
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC 4-Axis Machining Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Design Tips for CNC 4-Axis Machining C268 Brass
Small design adjustments often cut cost and lead time. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in C268 Brass. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Most C268 Brass parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Why C268 Brass?
Customers select C268 Brass for CNC 4-Axis Machining because it is free-machining with good conductivity. We handle grade verification and any required heat treatment or finishing.
CNC 4-Axis Machining Tolerances & Surface Finish
For CNC 4-Axis Machining, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Applications of CNC 4-Axis Machining C268 Brass
C268 Brass parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC 4-Axis Machining C268 Brass
Starting your project takes one email. Send your CAD or 2D drawing, the C268 Brass grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for C268 Brass
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Nickel plate | 5–15 µm | Hard, bright, corrosion resistant |
| Chrome plate | 0.3–1 µm | Decorative, over nickel |
| Clear lacquer | 10–20 µm | Stops the natural tarnish |
| Tin plate | 3–15 µm | Solderable contacts |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC 4-Axis Machining C268 Brass
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C268 Brass grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C268 Brass in Other Processes
Related
Send the drawing, the C268 Brass condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is C268 Brass a good choice for CNC 4-Axis Machining?
C268 Brass is free-machining with good conductivity, which makes it well suited to CNC 4-Axis Machining. We tune the process to the alloy so the finished C268 Brass machining part meets your dimensional and functional requirements.
What is the typical lead time and minimum order for CNC 4-Axis Machining C268 Brass?
CNC 4-Axis Machining prototypes for C268 Brass can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What material thickness or size range suits CNC 4-Axis Machining C268 Brass?
We machine C268 Brass across a broad size range; share your part envelope for confirmation.
What tolerances can you hold for CNC 4-Axis Machining C268 Brass?
Achievable tolerances for C268 Brass machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.