CNC Reaming C145 Tellurium Copper is part of VT machining's grade-specific capability. C145 Tellurium Copper is free-machining with high conductivity, and we combine controlled machining with material-aware setup to produce parts that meet your specification.
CNC Reaming Capability for C145 Tellurium Copper
- Free-machining copper
- ~90% IACS conductivity
- Tolerance to ±0.01 mm
- Electrical contacts
Machining C145 Tellurium Copper with CNC Reaming
C145 Tellurium Copper behaves predictably under CNC Reaming once parameters are dialled in: machinability is excellent (free-machining copper) with high conductivity retained, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C145 Tellurium Copper run consistently from one batch to the next.
CNC Reaming Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C145 Tellurium Copper part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why C145 Tellurium Copper?
C145 Tellurium Copper is chosen when a part needs what this grade offers — it is free-machining with high conductivity. We confirm the grade and any temper or heat-treat condition with you before machining.
Secondary Operations & Finishing
Finished C145 Tellurium Copper parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Reaming Tolerances & Surface Finish
For CNC Reaming, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Reaming C145 Tellurium Copper
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in C145 Tellurium Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Reaming C145 Tellurium Copper
Customers order CNC Reaming C145 Tellurium Copper components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Reaming C145 Tellurium Copper
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
C145 Tellurium Copper in Other Processes
Related
Need CNC Reaming C145 Tellurium Copper for your project? Send your drawing and quantity for a fast quotation.
Request a QuoteFrequently Asked Questions
How clean are the edges produced by CNC Reaming on C145 Tellurium Copper?
Machined C145 Tellurium Copper edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What tolerances can you hold for CNC Reaming C145 Tellurium Copper?
Achievable tolerances for C145 Tellurium Copper machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.
What material thickness or size range suits CNC Reaming C145 Tellurium Copper?
We machine C145 Tellurium Copper across a broad size range; share your part envelope for confirmation.
Does CNC Reaming C145 Tellurium Copper require dedicated tooling?
Most C145 Tellurium Copper machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What surface finish is achievable on C145 Tellurium Copper with CNC Reaming?
Surface finish on C145 Tellurium Copper is controlled to your specification; we confirm the achievable Ra against your callout.