VT machining offers CNC Punching for Grade 12 Titanium (UNS R53400 / Ti-0.3Mo-0.8Ni), typically supplied annealed. Cheaper Pd-free alternative to Gr7 with better high-temperature strength than Gr2.
CNC Punching Notes for Grade 12 Titanium
Grade 12 Titanium punches cleanly with standard clearance; minimum hole diameter is about the sheet thickness.
For estimating, a 100 × 100 × 10 mm block of Grade 12 Titanium weighs about 0.45 kg.
Process Data for CNC Punching Grade 12 Titanium
| Die clearance per side | 10% of thickness (0.2 mm at 2 mm) |
|---|---|
| Punch force, Ø10 hole in 2 mm | ~24.3 kN (2.5 t) |
| Minimum hole diameter | ≥ 1 × thickness |
Typical values for Grade 12 Titanium, Annealed; confirmed on the first part.
Grade 12 Titanium Data Relevant to CNC Punching
| Equivalent designations | UNS R53400 / Ti-0.3Mo-0.8Ni |
|---|---|
| Typical supply condition | Annealed |
| Hardness (typical) | ~200-235 HB |
| Tensile strength | ≥483 MPa |
Typical values; we work to your drawing and mill certificate.
More on CNC Punching Titanium
Finishing options, quality documentation and general cnc punching guidance for all titanium grades are on our CNC Punching Titanium page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Punching Grade 12 Titanium
Send a STEP/IGES model or PDF drawing, confirm Grade 12 Titanium and its condition (we usually see it supplied annealed), the quantity, critical tolerances and any finish or certificate requirements.
Grade 12 Titanium in Other Processes
Related
Send the drawing, the Grade 12 Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom Grade 12 Titanium parts to my drawing?
Yes. Grade 12 Titanium punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Punching Grade 12 Titanium and how is it done?
CNC Punching Grade 12 Titanium refers to cNC turret punching shears holes and form features in sheet metal using programmable tooling for fast, repeatable patterns. Applied to Grade 12 Titanium — high strength-to-weight, biocompatible and corrosion resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What tolerances can you hold for CNC Punching Grade 12 Titanium?
Achievable tolerances for Grade 12 Titanium punching depend on the alloy, geometry and feature size. Punching holds hole-position repeatability to around ±0.10 mm. Exact figures are confirmed against your drawing callouts.
What surface finish is achievable on Grade 12 Titanium with CNC Punching?
Surface finish on Grade 12 Titanium is controlled to your specification; we confirm the achievable Ra against your callout.
How clean are the edges produced by CNC Punching on Grade 12 Titanium?
Punched Grade 12 Titanium edges are clean when punch/die clearance is correct; we set clearance to the gauge and can add deburring if specified.
