VT machining specialises in CNC Gear Hobbing EN24 Steel. Because EN24 Steel is strong, economical and widely available, and its machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, we plan each job around the grade to protect accuracy and surface quality.
CNC Gear Hobbing Capability for EN24 Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
EN24 Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining EN24 Steel with CNC Gear Hobbing
When gear cutting EN24 Steel, machinability is good to excellent depending on carbon content; free-machining grades cut cleanly. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for EN24 Steel mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Gear Hobbing EN24 Steel
| Feature | Standard | Precision |
|---|---|---|
| Accuracy class | DIN 8 / AGMA 10 | DIN 6 / AGMA 12 |
| Profile deviation | 0.020 mm | 0.008 mm |
| Lead deviation | 0.020 mm | 0.008 mm |
| Pitch deviation (cumulative) | 0.040 mm | 0.015 mm |
| Runout | 0.030 mm | 0.010 mm |
| Tooth surface finish | Ra 1.6 µm | Ra 0.4 µm (ground) |
| Module range | m0.5–m8 | m1–m6 |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Gear Hobbing Tolerances & Surface Finish
Gear features are produced to a specified DIN/AGMA accuracy class, with profile and lead controlled for quiet, durable running under load.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Secondary Operations & Finishing
Most EN24 Steel parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Why EN24 Steel?
Customers select EN24 Steel for CNC Gear Hobbing because it is strong, economical and widely available. We handle grade verification and any required heat treatment or finishing.
Design Tips for CNC Gear Hobbing EN24 Steel
Small design adjustments often cut cost and lead time. Providing complete gear data (module, pressure angle, profile shift, quality class) lets us produce EN24 Steel gears right the first time. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Gear Hobbing Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Applications of CNC Gear Hobbing EN24 Steel
EN24 Steel parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Gear Hobbing EN24 Steel
Starting your project takes one email. Send your CAD or 2D drawing, the EN24 Steel grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for EN24 Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Gear Hobbing EN24 Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact EN24 Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
EN24 Steel in Other Processes
Related
Send the drawing, the EN24 Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Gear Hobbing EN24 Steel?
CNC Gear Hobbing prototypes for EN24 Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is EN24 Steel a good choice for CNC Gear Hobbing?
EN24 Steel is strong, economical and widely available, which makes it well suited to CNC Gear Hobbing. We tune the process to the alloy so the finished EN24 Steel gear cutting part meets your dimensional and functional requirements.
What gear accuracy class can you achieve on EN24 Steel?
Gear accuracy is specified to DIN/AGMA classes appropriate to the application. Profile and lead are controlled so EN24 Steel gears run accurately and quietly under load.
How clean are the edges produced by CNC Gear Hobbing on EN24 Steel?
Machined EN24 Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.