VT machining offers CNC Deburring for 40Cr Steel (GB/T 3077 / ~5140 / ~41Cr4 / SCr440), typically supplied Q&T. Chinese Cr steel, cheaper than 42CrMo with lower hardenability.
CNC Deburring Notes for 40Cr Steel
Burrs on 40Cr Steel are removed by vibratory, brush or manual deburring to the edge-break you specify.
Process Data for CNC Deburring 40Cr Steel
| Recommended method | Vibratory / brush deburring |
|---|---|
| Typical edge break | 0.1-0.3 mm or per drawing |
Typical values for 40Cr Steel, Q&T; confirmed on the first part.
Full material data for 40Cr Steel (GB/T 3077 / ~5140 / ~41Cr4 / SCr440) is on the CNC Polishing 40Cr Steel page.
More on CNC Deburring Steel
Finishing options, quality documentation and general cnc deburring guidance for all steel grades are on our CNC Deburring Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Deburring 40Cr Steel
Send a STEP/IGES model or PDF drawing, confirm 40Cr Steel and its condition (we usually see it supplied Q&T), the quantity, critical tolerances and any finish or certificate requirements.
40Cr Steel in Other Processes
Related
Send the drawing, the 40Cr Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Deburring 40Cr Steel and how is it done?
CNC Deburring 40Cr Steel refers to automated deburring removes sharp edges and burrs for safe handling and consistent edge quality. Applied to 40Cr Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
How clean are the edges produced by CNC Deburring on 40Cr Steel?
Our deburring leaves 40Cr Steel with a consistent, controlled edge break and burr-free surfaces.
Can VT machining make custom 40Cr Steel parts to my drawing?
Yes. 40Cr Steel finishing is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Why is 40Cr Steel a good choice for CNC Deburring?
40Cr Steel is strong, economical and widely available, which makes it well suited to CNC Deburring. We tune the process to the alloy so the finished 40Cr Steel finishing part meets your dimensional and functional requirements.
What surface finish is achievable on 40Cr Steel with CNC Deburring?
Our finishing processes refine 40Cr Steel surfaces to Ra values as low as 0.05 µm for cosmetic or sealing faces.
What tolerances can you hold for CNC Deburring 40Cr Steel?
Achievable tolerances for 40Cr Steel finishing depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
