CNC Routing 1060 Aluminum from VT machining delivers precision 1060 Aluminum parts made to your exact drawing. CNC routing cuts profiles and openings in sheet and plate at high feed rates with a rotating router bit, with parameters tuned to 1060 Aluminum, which is lightweight with excellent machinability.
CNC Routing Capability for 1060 Aluminum
- Lightweight (~2.7 g/cm³)
- Excellent machinability
- Tolerance to ±0.01 mm
- Anodising-ready
1060 Aluminum Material Data
| Density | 2.70 g/cm³ |
|---|---|
| Tensile strength | 310 MPa |
| Yield strength (0.2%) | 276 MPa |
| Hardness | 95 HB |
| Melting point | 582–652 °C |
| Thermal conductivity | 167 W/m·K |
| Thermal expansion | 23.6 ×10⁻⁶/K |
| Electrical conductivity | 43% |
| Machinability (C36000 = 100%) | 190% |
| Grades we run | 6061, 6082, 6063, 7075-T6, 5052, 2024-T3, MIC-6 cast plate |
Published typical values for 6061-T6. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Thin walls relax after roughing. We rough, let the part stabilise, then finish — otherwise a 1.5 mm wall bows by more than the tolerance it was cut to.
Machining 1060 Aluminum with CNC Routing
When machining 1060 Aluminum, machinability is excellent; high cutting speeds and superb finishes achievable. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for 1060 Aluminum mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Routing 1060 Aluminum
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why 1060 Aluminum?
Customers select 1060 Aluminum for CNC Routing because it is lightweight with excellent machinability. We handle grade verification and any required heat treatment or finishing.
Design Tips for CNC Routing 1060 Aluminum
Small design adjustments often cut cost and lead time. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in 1060 Aluminum. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Most 1060 Aluminum parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Routing Tolerances & Surface Finish
For CNC Routing, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
CNC Routing Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Applications of CNC Routing 1060 Aluminum
1060 Aluminum parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Routing 1060 Aluminum
Starting your project takes one email. Send your CAD or 2D drawing, the 1060 Aluminum grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for 1060 Aluminum
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Clear anodise (Type II) | 5–25 µm | Corrosion protection, keeps the natural colour |
| Colour anodise | 10–25 µm | Black, red, blue, gold; add 0.02 mm to close tolerances |
| Hard anodise (Type III) | 25–50 µm | 60–70 HRC surface, grows 50% into the part |
| Chromate / Alodine 1200 | < 1 µm | Conductive, meets MIL-DTL-5541 |
| Powder coat | 60–120 µm | RAL colours, needs 0.3 mm clearance on mating features |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Routing 1060 Aluminum
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact 1060 Aluminum grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
1060 Aluminum in Other Processes
Related
Send the drawing, the 1060 Aluminum condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom 1060 Aluminum parts to my drawing?
Yes. 1060 Aluminum 1060 Aluminum machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Does CNC Routing 1060 Aluminum require dedicated tooling?
Most 1060 Aluminum machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What is CNC Routing 1060 Aluminum and how is it done?
CNC Routing 1060 Aluminum refers to cNC routing cuts profiles and openings in sheet and plate at high feed rates with a rotating router bit. Applied to 1060 Aluminum — lightweight with excellent machinability — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is 1060 Aluminum a good choice for CNC Routing?
1060 Aluminum is lightweight with excellent machinability, which makes it well suited to CNC Routing. We tune the process to the alloy so the finished 1060 Aluminum machining part meets your dimensional and functional requirements.