VT machining provides CNC Routing S355JR Steel for customers who need accurate, repeatable S355JR Steel components. The machinability of S355JR Steel is good to excellent depending on carbon content; free-machining grades cut cleanly, so we set the operation up specifically for this grade.
CNC Routing Capability for S355JR Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
S355JR Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining S355JR Steel with CNC Routing
The machinability of S355JR Steel is good to excellent depending on carbon content; free-machining grades cut cleanly. For CNC Routing we select tooling, feeds, speeds and coolant to match, keeping the S355JR Steel workpiece stable and the result accurate.
Because we machine S355JR Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Routing S355JR Steel
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Routing Tolerances & Surface Finish
For CNC Routing, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Secondary Operations & Finishing
We complete S355JR Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
Design Tips for CNC Routing S355JR Steel
A few design choices make a real difference to cost and quality. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in S355JR Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Why S355JR Steel?
Specifying S355JR Steel for CNC Routing S355JR Steel is usually about its properties: strong, economical and widely available. Tell us the condition you need and we machine to it.
CNC Routing Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on S355JR Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
Applications of CNC Routing S355JR Steel
CNC Routing of S355JR Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Routing S355JR Steel
Ordering S355JR Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for S355JR Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Routing S355JR Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact S355JR Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
S355JR Steel in Other Processes
Related
Send the drawing, the S355JR Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom S355JR Steel parts to my drawing?
Yes. S355JR Steel S355JR Steel machining is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
Does CNC Routing S355JR Steel require dedicated tooling?
Most S355JR Steel machining work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Which industries use CNC Routing S355JR Steel parts?
CNC Routing S355JR Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise S355JR Steel components are required.
How clean are the edges produced by CNC Routing on S355JR Steel?
Machined S355JR Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Why is S355JR Steel a good choice for CNC Routing?
S355JR Steel is strong, economical and widely available, which makes it well suited to CNC Routing. We tune the process to the alloy so the finished S355JR Steel machining part meets your dimensional and functional requirements.
What is the typical lead time and minimum order for CNC Routing S355JR Steel?
CNC Routing prototypes for S355JR Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.