VT machining offers CNC Laser Cutting for T301 Stainless Steel (301 temper-rolled strip (JIS SUS301-CSP)), typically supplied temper-rolled strip. Supplied in pre-hardened spring tempers; parts are blanked/etched to shape rather than heavily machined.
CNC Laser Cutting Notes for T301 Stainless Steel
Fibre-laser cutting of T301 Stainless Steel sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of T301 Stainless Steel weighs about 0.79 kg.
Process Data for CNC Laser Cutting T301 Stainless Steel
| Max practical thickness (6 kW fibre) | 20 mm |
|---|---|
| Assist gas | Nitrogen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.1 mm (≤6 mm), ±0.2 mm thicker |
Typical values for T301 Stainless Steel, Temper-rolled strip; confirmed on the first part.
T301 Stainless Steel Data Relevant to CNC Laser Cutting
| Equivalent designations | 301 temper-rolled strip (JIS SUS301-CSP) |
|---|---|
| Key composition | Cr 16-18%, Ni 6-8% |
| Density | 7.9 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Stainless Steel
Finishing options, quality documentation and general cnc laser cutting guidance for all stainless steel grades are on our CNC Laser Cutting Stainless Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting T301 Stainless Steel
Send a STEP/IGES model or PDF drawing, confirm T301 Stainless Steel and its condition (we usually see it supplied temper-rolled strip), the quantity, critical tolerances and any finish or certificate requirements.
T301 Stainless Steel in Other Processes
Related
Send the drawing, the T301 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Laser Cutting T301 Stainless Steel?
CNC Laser Cutting prototypes for T301 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What tolerances can you hold for CNC Laser Cutting T301 Stainless Steel?
Achievable tolerances for T301 Stainless Steel cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is CNC Laser Cutting T301 Stainless Steel and how is it done?
CNC Laser Cutting T301 Stainless Steel refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to T301 Stainless Steel — corrosion resistant, strong and hygienic — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
How clean are the edges produced by CNC Laser Cutting on T301 Stainless Steel?
Laser cutting leaves T301 Stainless Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What material thickness or size range suits CNC Laser Cutting T301 Stainless Steel?
Laser-cut T301 Stainless Steel thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.