VT machining provides CNC Boring T301 Stainless Steel for customers who need accurate, repeatable T301 Stainless Steel components. The machinability of T301 Stainless Steel is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, so we set the operation up specifically for this grade.
CNC Boring Capability for T301 Stainless Steel
- Austenitic/martensitic grades
- Corrosion resistant
- Tolerance to ±0.01 mm
- Typical hardness 70–200 HB (annealed)
T301 Stainless Steel Material Data
| Density | 8.00 g/cm³ |
|---|---|
| Tensile strength | 515 MPa |
| Yield strength (0.2%) | 205 MPa |
| Hardness | 170 HB |
| Melting point | 1400–1450 °C |
| Thermal conductivity | 16.2 W/m·K |
| Thermal expansion | 17.3 ×10⁻⁶/K |
| Electrical conductivity | 2.4% |
| Machinability (C36000 = 100%) | 45% |
| Grades we run | 303, 304/304L, 316/316L, 321, 410, 416, 420, 17-4PH, 2205 duplex |
Published typical values for 304. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
It work-hardens the moment a tool dwells. Constant feed and positive-rake tooling; a rubbing pass leaves a glazed skin the next tool cannot get through.
Machining T301 Stainless Steel with CNC Boring
T301 Stainless Steel behaves predictably under CNC Boring once parameters are dialled in: machinability is moderate; work-hardens, so positive-rake tooling and steady feeds are used to avoid glazing, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of T301 Stainless Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Boring T301 Stainless Steel
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Finished T301 Stainless Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Design Tips for CNC Boring T301 Stainless Steel
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help T301 Stainless Steel turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Boring Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every T301 Stainless Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Why T301 Stainless Steel?
T301 Stainless Steel is chosen when a part needs what this grade offers — it is corrosion resistant, strong and hygienic. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Boring Tolerances & Surface Finish
Turned T301 Stainless Steel holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Boring T301 Stainless Steel
Customers order CNC Boring T301 Stainless Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Boring T301 Stainless Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for T301 Stainless Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Citric passivation | — | ASTM A967 / AMS 2700, removes free iron |
| Electropolish | 5–25 µm removed | Ra improves by roughly half, hygienic surface |
| Brushed / grained | Ra 0.4–1.6 µm | No. 4 finish, directional |
| PVD coating | 2–5 µm | TiN, TiCN for wear surfaces |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Boring T301 Stainless Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact T301 Stainless Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
T301 Stainless Steel in Other Processes
Related
Send the drawing, the T301 Stainless Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is CNC Boring T301 Stainless Steel and how is it done?
CNC Boring T301 Stainless Steel refers to boring enlarges and finishes existing holes to precise diameter, roundness and surface finish. Applied to T301 Stainless Steel — corrosion resistant, strong and hygienic — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
How clean are the edges produced by CNC Boring on T301 Stainless Steel?
Machined T301 Stainless Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
Which industries use CNC Boring T301 Stainless Steel parts?
CNC Boring T301 Stainless Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise T301 Stainless Steel components are required.
What material thickness or size range suits CNC Boring T301 Stainless Steel?
Turned T301 Stainless Steel parts are produced from bar or chuck stock across a wide diameter range.
What is the typical lead time and minimum order for CNC Boring T301 Stainless Steel?
CNC Boring prototypes for T301 Stainless Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.