VT machining offers CNC Laser Cutting for C954 Aluminum Bronze (UNS C95400 (cast)), typically supplied as cast or heat-treated. Cast aluminium bronze; supplied as castings or continuous-cast bar.
CNC Laser Cutting Notes for C954 Aluminum Bronze
Fibre-laser cutting of C954 Aluminum Bronze sheet gives a narrow kerf with minimal burr.
For estimating, a 100 × 100 × 10 mm block of C954 Aluminum Bronze weighs about 0.75 kg.
Process Data for CNC Laser Cutting C954 Aluminum Bronze
| Max practical thickness (6 kW fibre) | 8 mm |
|---|---|
| Assist gas | Nitrogen |
| Kerf width | 0.1-0.3 mm |
| Profile tolerance | ±0.05 mm (≤3 mm sheet) |
Typical values for C954 Aluminum Bronze, As cast or heat-treated; confirmed on the first part.
C954 Aluminum Bronze Data Relevant to CNC Laser Cutting
| Equivalent designations | UNS C95400 (cast) |
|---|---|
| Key composition | Al 10-11.5%, Fe 3-5% |
| Density | 7.45 g/cm³ |
Typical values; we work to your drawing and mill certificate.
More on CNC Laser Cutting Bronze
Finishing options, quality documentation and general cnc laser cutting guidance for all bronze grades are on our CNC Laser Cutting Bronze page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Laser Cutting C954 Aluminum Bronze
Send a STEP/IGES model or PDF drawing, confirm C954 Aluminum Bronze and its condition (we usually see it supplied as cast or heat-treated), the quantity, critical tolerances and any finish or certificate requirements.
C954 Aluminum Bronze in Other Processes
Related
Send the drawing, the C954 Aluminum Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom C954 Aluminum Bronze parts to my drawing?
Yes. C954 Aluminum Bronze cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Laser Cutting C954 Aluminum Bronze?
Achievable tolerances for C954 Aluminum Bronze cutting depend on the alloy, geometry and feature size. Laser cutting holds contour tolerances to around ±0.05 mm depending on thickness. Exact figures are confirmed against your drawing callouts.
What is CNC Laser Cutting C954 Aluminum Bronze and how is it done?
CNC Laser Cutting C954 Aluminum Bronze refers to cNC fiber laser cutting follows a programmed path to cut sheet and plate with a clean, narrow kerf. Applied to C954 Aluminum Bronze — high-strength and seawater-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Does CNC Laser Cutting C954 Aluminum Bronze require dedicated tooling?
Most C954 Aluminum Bronze cutting work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
What material thickness or size range suits CNC Laser Cutting C954 Aluminum Bronze?
Laser-cut C954 Aluminum Bronze thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What surface finish is achievable on C954 Aluminum Bronze with CNC Laser Cutting?
Laser cutting leaves a clean cut face on C954 Aluminum Bronze with a small heat-affected zone; most parts need little secondary finishing.