CNC 5-Axis Machining C954 Aluminum Bronze is part of VT machining's grade-specific capability. C954 Aluminum Bronze is high-strength and seawater-corrosion-resistant, and we combine controlled machining with material-aware setup to produce parts that meet your specification.
CNC 5-Axis Machining Capability for C954 Aluminum Bronze
- High strength
- Seawater corrosion resistant
- Tolerance to ±0.01 mm
- Good fatigue strength
C954 Aluminum Bronze Material Data
| Density | 8.80 g/cm³ |
|---|---|
| Tensile strength | 240 MPa |
| Yield strength (0.2%) | 125 MPa |
| Hardness | 65 HB |
| Melting point | 855–980 °C |
| Thermal conductivity | 59 W/m·K |
| Thermal expansion | 18.0 ×10⁻⁶/K |
| Electrical conductivity | 12% |
| Machinability (C36000 = 100%) | 70% |
| Grades we run | C93200 SAE 660, C54400, C63000 aluminium bronze, C86300 manganese bronze |
Published typical values for C93200 (SAE 660). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Cast bearing bronze has porosity. On sealing faces we specify continuous-cast stock rather than sand-cast, because a pinhole in a bore face is not repairable.
Machining C954 Aluminum Bronze with CNC 5-Axis Machining
C954 Aluminum Bronze behaves predictably under CNC 5-Axis Machining once parameters are dialled in: machinability is moderate; tough, strong, corrosion-resistant, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C954 Aluminum Bronze run consistently from one batch to the next.
Achievable Tolerances for CNC 5-Axis Machining C954 Aluminum Bronze
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why C954 Aluminum Bronze?
C954 Aluminum Bronze is chosen when a part needs what this grade offers — it is high-strength and seawater-corrosion-resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC 5-Axis Machining Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C954 Aluminum Bronze part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC 5-Axis Machining C954 Aluminum Bronze
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in C954 Aluminum Bronze. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Finished C954 Aluminum Bronze parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC 5-Axis Machining Tolerances & Surface Finish
For CNC 5-Axis Machining, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC 5-Axis Machining C954 Aluminum Bronze
Customers order CNC 5-Axis Machining C954 Aluminum Bronze components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC 5-Axis Machining C954 Aluminum Bronze
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for C954 Aluminum Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC 5-Axis Machining C954 Aluminum Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C954 Aluminum Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C954 Aluminum Bronze in Other Processes
Related
Send the drawing, the C954 Aluminum Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Which industries use CNC 5-Axis Machining C954 Aluminum Bronze parts?
CNC 5-Axis Machining C954 Aluminum Bronze parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C954 Aluminum Bronze components are required.
Why is C954 Aluminum Bronze a good choice for CNC 5-Axis Machining?
C954 Aluminum Bronze is high-strength and seawater-corrosion-resistant, which makes it well suited to CNC 5-Axis Machining. We tune the process to the alloy so the finished C954 Aluminum Bronze machining part meets your dimensional and functional requirements.
What tolerances can you hold for CNC 5-Axis Machining C954 Aluminum Bronze?
Achievable tolerances for C954 Aluminum Bronze machining depend on the alloy, geometry and feature size. Milling holds positional and dimensional tolerances to around ±0.01 mm, tighter with precision setups. Exact figures are confirmed against your drawing callouts.
What is the typical lead time and minimum order for CNC 5-Axis Machining C954 Aluminum Bronze?
CNC 5-Axis Machining prototypes for C954 Aluminum Bronze can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What is CNC 5-Axis Machining C954 Aluminum Bronze and how is it done?
CNC 5-Axis Machining C954 Aluminum Bronze refers to five-axis machining orients the tool to complex geometry in one setup, reducing fixturing and improving accuracy. Applied to C954 Aluminum Bronze — high-strength and seawater-corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.