VT machining offers CNC Waterjet Cutting for SPCC Steel (JIS G3141 / ~DC01 / ~1008 CR), typically supplied cold-rolled sheet. Cold-rolled commercial sheet with clean surface for painting.
CNC Waterjet Cutting Notes for SPCC Steel
Waterjet cutting leaves SPCC Steel with no heat-affected zone, which matters when later machining or welding follows.
For estimating, a 100 × 100 × 10 mm block of SPCC Steel weighs about 0.79 kg.
Process Data for CNC Waterjet Cutting SPCC Steel
| Cutting speed at 10 mm | ~120 mm/min |
|---|---|
| Cutting speed at 25 mm | ~38 mm/min |
| Profile tolerance | ±0.1 mm; edge taper <0.05 mm with taper compensation |
| Heat-affected zone | None |
Typical values for SPCC Steel, Cold-rolled sheet; confirmed on the first part.
Full material data for SPCC Steel (JIS G3141 / ~DC01 / ~1008 CR) is on the CNC Laser Cutting SPCC Steel page.
More on CNC Waterjet Cutting Steel
Finishing options, quality documentation and general cnc waterjet cutting guidance for all steel grades are on our CNC Waterjet Cutting Steel page.
No drawing yet? Sketch the part in our free 3D + 2D builder and send it with your RFQ.
Quoting CNC Waterjet Cutting SPCC Steel
Send a STEP/IGES model or PDF drawing, confirm SPCC Steel and its condition (we usually see it supplied cold-rolled sheet), the quantity, critical tolerances and any finish or certificate requirements.
SPCC Steel in Other Processes
Related
Send the drawing, the SPCC Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Waterjet Cutting SPCC Steel?
Laser-cut SPCC Steel thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.
What is CNC Waterjet Cutting SPCC Steel and how is it done?
CNC Waterjet Cutting SPCC Steel refers to abrasive waterjet cutting erodes metal with a high-pressure abrasive stream, with no heat-affected zone. Applied to SPCC Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What is the typical lead time and minimum order for CNC Waterjet Cutting SPCC Steel?
CNC Waterjet Cutting prototypes for SPCC Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Why is SPCC Steel a good choice for CNC Waterjet Cutting?
SPCC Steel is strong, economical and widely available, which makes it well suited to CNC Waterjet Cutting. We tune the process to the alloy so the finished SPCC Steel cutting part meets your dimensional and functional requirements.
How clean are the edges produced by CNC Waterjet Cutting on SPCC Steel?
Laser cutting leaves SPCC Steel with a narrow kerf and a clean, near burr-free edge and only a small heat-affected zone.
What surface finish is achievable on SPCC Steel with CNC Waterjet Cutting?
Laser cutting leaves a clean cut face on SPCC Steel with a small heat-affected zone; most parts need little secondary finishing.