CNC Surface Grinding Grade 7 Titanium is part of VT machining's grade-specific capability. Grade 7 Titanium is high strength-to-weight, biocompatible and corrosion resistant, and we combine controlled grinding with material-aware setup to produce parts that meet your specification.
CNC Surface Grinding Capability for Grade 7 Titanium
- High strength-to-weight
- Biocompatible
- Corrosion resistant
- Tolerance to ±0.01 mm
Grade 7 Titanium Material Data
| Density | 4.43 g/cm³ |
|---|---|
| Tensile strength | 950 MPa |
| Yield strength (0.2%) | 880 MPa |
| Hardness | 334 HB / 36 HRC |
| Melting point | 1604–1660 °C |
| Thermal conductivity | 6.7 W/m·K |
| Thermal expansion | 8.6 ×10⁻⁶/K |
| Electrical conductivity | 3.1% |
| Machinability (C36000 = 100%) | 22% |
| Grades we run | Gr 1, Gr 2 (CP), Gr 5 Ti-6Al-4V, Gr 23 ELI, Gr 7, Gr 9 |
Published typical values for Ti-6Al-4V (Gr 5). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Heat has nowhere to go — thermal conductivity is 1/25th of aluminium, so it all goes into the tool. Low surface speed, heavy feed, flood coolant, and the cutter never stops moving.
Machining Grade 7 Titanium with CNC Surface Grinding
When grinding Grade 7 Titanium, machinability is difficult; low speeds, high feeds, flood coolant to manage heat. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for Grade 7 Titanium mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Surface Grinding Grade 7 Titanium
| Feature | Standard | Precision |
|---|---|---|
| Size (OD, ID, thickness) | ±0.005 mm | ±0.002 mm |
| Flatness over 100 mm | 0.010 mm | 0.003 mm |
| Parallelism | 0.010 mm | 0.003 mm |
| Roundness | 0.005 mm | 0.002 mm |
| Squareness | 0.010 mm | 0.005 mm |
| Surface finish | Ra 0.4 µm | Ra 0.1 µm |
| Workpiece hardness | up to 62 HRC | up to 65 HRC |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Secondary Operations & Finishing
Most Grade 7 Titanium parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Surface Grinding Tolerances & Surface Finish
Ground Grade 7 Titanium reaches single-micron tolerances on size, flatness and parallelism, with surface finishes down to Ra 0.1–0.4 µm — and a near-mirror finish on suitable alloys.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Why Grade 7 Titanium?
Customers select Grade 7 Titanium for CNC Surface Grinding because it is high strength-to-weight, biocompatible and corrosion resistant. We handle grade verification and any required heat treatment or finishing.
Design Tips for CNC Surface Grinding Grade 7 Titanium
Small design adjustments often cut cost and lead time. Allowing adequate grind stock, specifying realistic flatness over the true datum, and relieving corners help us hit tight tolerances on Grade 7 Titanium efficiently. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Surface Grinding Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Applications of CNC Surface Grinding Grade 7 Titanium
Grade 7 Titanium parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Surface Grinding Grade 7 Titanium
Starting your project takes one email. Send your CAD or 2D drawing, the Grade 7 Titanium grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for Grade 7 Titanium
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Type II anodise | — | Colour coding, biocompatible |
| Type III anodise | — | Anti-galling for threaded and sliding parts |
| Passivation | — | ASTM F86 for implant-grade parts |
| Electropolish | 5–20 µm removed | Removes the machining layer for medical use |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Surface Grinding Grade 7 Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Grade 7 Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Grade 7 Titanium in Other Processes
Related
Send the drawing, the Grade 7 Titanium condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is Grade 7 Titanium a good choice for CNC Surface Grinding?
Grade 7 Titanium is high strength-to-weight, biocompatible and corrosion resistant, which makes it well suited to CNC Surface Grinding. We tune the process to the alloy so the finished Grade 7 Titanium grinding part meets your dimensional and functional requirements.
Which industries use CNC Surface Grinding Grade 7 Titanium parts?
CNC Surface Grinding Grade 7 Titanium parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Grade 7 Titanium components are required.
Can VT machining make custom Grade 7 Titanium parts to my drawing?
Yes. Grade 7 Titanium Grade 7 Titanium grinding is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Surface Grinding Grade 7 Titanium?
Achievable tolerances for Grade 7 Titanium grinding depend on the alloy, geometry and feature size. Grinding routinely holds single-micron tolerances on diameter, flatness and parallelism. Exact figures are confirmed against your drawing callouts.