CNC Saw Cutting Steel is a core capability at VT machining. We combine controlled forming with material-aware setup for Steel — an alloy that is strong, economical, widely available carbon/alloy grades — to produce parts that meet your specification first time.
Process Data for CNC Saw Cutting Steel
| Bandsaw blade speed | 45-90 m/min |
|---|---|
| Blade | M42 bi-metal, variable pitch |
| Length tolerance | ±0.2 mm (bandsaw) / ±0.1 mm (circular) |
Shown for 1018 Steel, the most common Steel grade we see for CNC Saw Cutting. Typical values for 1018 Steel, Cold-drawn; confirmed on the first part.
CNC Saw Cutting Capability for Steel
- Length tolerance ±0.2 mm
- Bar, tube & plate
- Bundle cutting
- Square-cut faces
Steel material properties, finishing options and grade notes are on our CNC Bending Steel page.
How CNC Saw Cutting Steel Works
The Steel blank is bent or formed against tooling under CNC-controlled ram travel and back-gauge positioning. Bend allowance and springback are compensated in the program so finished angles hit the print.
We start from your supplied geometry and tolerance scheme. The setup is designed to minimise re-clamping, which protects positional accuracy across features. A first article is verified against the drawing before the balance of the batch is released.
Achievable Tolerances for CNC Saw Cutting Steel
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Saw Cutting Steel
Small design adjustments often cut cost and lead time. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Saw Cutting Tolerances & Surface Finish
Formed Steel holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Saw Cutting Steel
Steel parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
Typical Steel Parts for CNC Saw Cutting
Illustrative examples of CNC Saw Cutting Steel parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Hemmed panel edge
- Material
- Steel
- Size
- 400 mm hem, 1.2 mm
- Key callouts
- Hem flat to 0.3 mm
- Batch
- 1,500 pcs
Hemmed to remove the sharp edge without a secondary deburr operation.
U-channel
- Material
- Steel
- Size
- 800 mm long, 3 mm thick
- Key callouts
- Angle ±0.5°, straightness 1 mm over length
- Batch
- 250 pcs
Formed in two hits with a rotating die to avoid marking the outside face.
Chassis with countersinks
- Material
- Steel
- Size
- 450 × 300 × 2 mm
- Key callouts
- Countersink depth ±0.1 mm, 6 bends
- Batch
- 700 pcs
Countersinks formed before bending while the sheet is still flat and supported.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Saw Cutting Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Saw Cutting
Other Processes for Steel
Send the drawing, the Steel grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Saw Cutting Steel?
We form Steel sheet and plate to your developed flat pattern and bend sequence.
What tolerances can you hold for CNC Saw Cutting Steel?
Achievable tolerances for Steel forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
How clean are the edges produced by CNC Saw Cutting on Steel?
Machined Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is CNC Saw Cutting Steel and how is it done?
CNC Saw Cutting Steel refers to cNC saw cutting sections bar, tube and plate to precise length for downstream machining. Applied to Steel — strong, economical, widely available carbon/alloy grades — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.