VT machining provides CNC Saw Cutting Spring Steel for customers who need accurate, repeatable Spring Steel components. Because Spring Steel is high yield strength and elastic recovery, we adapt the process to suit — controlling the variables that matter for this alloy.
Process Data for CNC Saw Cutting Spring Steel
| Bandsaw blade speed | 25-45 m/min |
|---|---|
| Blade | M42 bi-metal, variable pitch |
| Length tolerance | ±0.2 mm (bandsaw) / ±0.1 mm (circular) |
Shown for Spring Steel (65Mn / SK5 / 1075), the most common Spring Steel grade we see for CNC Saw Cutting. Typical values for Spring Steel (65Mn / SK5 / 1075), Annealed or hardened & tempered strip; confirmed on the first part.
CNC Saw Cutting Capability for Spring Steel
- Length tolerance ±0.2 mm
- Bar, tube & plate
- Bundle cutting
- Square-cut faces
Spring Steel material properties, finishing options and grade notes are on our CNC Bending Spring Steel page.
How CNC Saw Cutting Spring Steel Works
The Spring Steel blank is bent or formed against tooling under CNC-controlled ram travel and back-gauge positioning. Bend allowance and springback are compensated in the program so finished angles hit the print.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Saw Cutting Spring Steel
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Saw Cutting Tolerances & Surface Finish
Formed Spring Steel holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Saw Cutting Spring Steel
A few design choices make a real difference to cost and quality. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Spring Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Saw Cutting Spring Steel
CNC Saw Cutting of Spring Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
Typical Spring Steel Parts for CNC Saw Cutting
Illustrative examples of CNC Saw Cutting Spring Steel parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Chassis with countersinks
- Material
- Spring Steel
- Size
- 450 × 300 × 2 mm
- Key callouts
- Countersink depth ±0.1 mm, 6 bends
- Batch
- 700 pcs
Countersinks formed before bending while the sheet is still flat and supported.
Sheet-metal enclosure
- Material
- Spring Steel
- Size
- 300 × 200 × 120 mm
- Key callouts
- Bend angle ±0.5°, diagonal ±0.5 mm
- Batch
- 400 pcs
Bend sequence chosen so no flange collides with the tool on the last hit.
Mounting bracket
- Material
- Spring Steel
- Size
- 120 × 60 mm, 2 bends
- Key callouts
- Angle ±0.5°, hole-to-bend ±0.15 mm
- Batch
- 3,000 pcs
Holes placed at least 2.5 × thickness from the bend line so they do not distort.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Saw Cutting Spring Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Spring Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Saw Cutting
Other Processes for Spring Steel
Send the drawing, the Spring Steel grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom Spring Steel parts to my drawing?
Yes. Spring Steel forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What material thickness or size range suits CNC Saw Cutting Spring Steel?
We form Spring Steel sheet and plate to your developed flat pattern and bend sequence.
What is CNC Saw Cutting Spring Steel and how is it done?
CNC Saw Cutting Spring Steel refers to cNC saw cutting sections bar, tube and plate to precise length for downstream machining. Applied to Spring Steel — high yield strength and elastic recovery — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Which industries use CNC Saw Cutting Spring Steel parts?
CNC Saw Cutting Spring Steel parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Spring Steel components are required.
How clean are the edges produced by CNC Saw Cutting on Spring Steel?
Machined Spring Steel edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What is the typical lead time and minimum order for CNC Saw Cutting Spring Steel?
CNC Saw Cutting prototypes for Spring Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.