CNC Saw Cutting NAK80 Mold Steel from VT machining delivers precision NAK80 Mold Steel parts made to your exact drawing. CNC saw cutting sections bar, tube and plate to precise length for downstream machining, with parameters tuned to NAK80 Mold Steel, which is mold-grade, polishable and hardenable.
CNC Saw Cutting Capability for NAK80 Mold Steel
- Mold-grade cleanliness
- Polishable to mirror finish
- Hardenable to 48–54 HRC
- Tolerance to ±0.005 mm
NAK80 Mold Steel Material Data
| Density | 14.5 g/cm³ |
|---|---|
| Tensile strength | 2000–3500 (TRS) MPa |
| Yield strength (0.2%) | — |
| Hardness | 88–93 HRA / 1300–1800 HV |
| Melting point | 2870 (WC) °C |
| Thermal conductivity | 70–100 W/m·K |
| Thermal expansion | 5.0 ×10⁻⁶/K |
| Electrical conductivity | 10% |
| Machinability (C36000 = 100%) | grind / EDM only |
| Grades we run | YG6, YG8, YG15 (K10–K30), D2, H13, M2, SKD11 |
Published typical values for WC-Co (YG8 / K20). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Everything is done by grinding, wire EDM or sinker EDM. Design in a small corner radius wherever possible — a true sharp internal corner doubles the EDM time.
Machining NAK80 Mold Steel with CNC Saw Cutting
NAK80 Mold Steel behaves predictably under CNC Saw Cutting once parameters are dialled in: machinability is pre-hardened or machined-then-hardened; polishes to high finish for molds, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of NAK80 Mold Steel run consistently from one batch to the next.
Achievable Tolerances for CNC Saw Cutting NAK80 Mold Steel
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Saw Cutting NAK80 Mold Steel
We are happy to suggest design tweaks that improve manufacturability. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed NAK80 Mold Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Saw Cutting Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every NAK80 Mold Steel part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Secondary Operations & Finishing
Finished NAK80 Mold Steel parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
Why NAK80 Mold Steel?
NAK80 Mold Steel is chosen when a part needs what this grade offers — it is mold-grade, polishable and hardenable. We confirm the grade and any temper or heat-treat condition with you before machining.
CNC Saw Cutting Tolerances & Surface Finish
Formed NAK80 Mold Steel holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Applications of CNC Saw Cutting NAK80 Mold Steel
Customers order CNC Saw Cutting NAK80 Mold Steel components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Saw Cutting NAK80 Mold Steel
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for NAK80 Mold Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Saw Cutting NAK80 Mold Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact NAK80 Mold Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
NAK80 Mold Steel in Other Processes
Related
Send the drawing, the NAK80 Mold Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Why is NAK80 Mold Steel a good choice for CNC Saw Cutting?
NAK80 Mold Steel is mold-grade, polishable and hardenable, which makes it well suited to CNC Saw Cutting. We tune the process to the alloy so the finished NAK80 Mold Steel forming part meets your dimensional and functional requirements.
What material thickness or size range suits CNC Saw Cutting NAK80 Mold Steel?
We form NAK80 Mold Steel sheet and plate to your developed flat pattern and bend sequence.
What tolerances can you hold for CNC Saw Cutting NAK80 Mold Steel?
Achievable tolerances for NAK80 Mold Steel forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.
What surface finish is achievable on NAK80 Mold Steel with CNC Saw Cutting?
Surface finish on NAK80 Mold Steel is controlled to your specification; we confirm the achievable Ra against your callout.
Can VT machining make custom NAK80 Mold Steel parts to my drawing?
Yes. NAK80 Mold Steel NAK80 Mold Steel forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.