VT machining provides CNC Saw Cutting C510 Phosphor Bronze for customers who need accurate, repeatable C510 Phosphor Bronze components. The machinability of C510 Phosphor Bronze is good; springy with excellent fatigue life, so we set the operation up specifically for this grade.
CNC Saw Cutting Capability for C510 Phosphor Bronze
- Spring temper available
- Good fatigue life
- Corrosion resistant
- Low-friction
C510 Phosphor Bronze Material Data
| Density | 8.86 g/cm³ |
|---|---|
| Tensile strength | 325–965 MPa |
| Yield strength (0.2%) | 140–550 MPa |
| Hardness | 60–200 HV |
| Melting point | 975–1060 °C |
| Thermal conductivity | 69 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 15% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C51000, C51900, C52100, C54400 free-cutting |
Published typical values for C51000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Spring temper is destroyed by heat. Contacts and spring fingers are etched or wire-EDM cut, never laser cut.
Machining C510 Phosphor Bronze with CNC Saw Cutting
C510 Phosphor Bronze behaves predictably under CNC Saw Cutting once parameters are dialled in: machinability is good; springy with excellent fatigue life, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C510 Phosphor Bronze run consistently from one batch to the next.
Achievable Tolerances for CNC Saw Cutting C510 Phosphor Bronze
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Saw Cutting C510 Phosphor Bronze
We are happy to suggest design tweaks that improve manufacturability. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed C510 Phosphor Bronze. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Saw Cutting Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C510 Phosphor Bronze part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Secondary Operations & Finishing
Finished C510 Phosphor Bronze parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Saw Cutting Tolerances & Surface Finish
Formed C510 Phosphor Bronze holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Why C510 Phosphor Bronze?
C510 Phosphor Bronze is chosen when a part needs what this grade offers — it is springy, low-friction and corrosion-resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Applications of CNC Saw Cutting C510 Phosphor Bronze
Customers order CNC Saw Cutting C510 Phosphor Bronze components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Saw Cutting C510 Phosphor Bronze
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for C510 Phosphor Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Saw Cutting C510 Phosphor Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C510 Phosphor Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C510 Phosphor Bronze in Other Processes
Related
Send the drawing, the C510 Phosphor Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on C510 Phosphor Bronze with CNC Saw Cutting?
Surface finish on C510 Phosphor Bronze is controlled to your specification; we confirm the achievable Ra against your callout.
Which industries use CNC Saw Cutting C510 Phosphor Bronze parts?
CNC Saw Cutting C510 Phosphor Bronze parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C510 Phosphor Bronze components are required.
Can VT machining make custom C510 Phosphor Bronze parts to my drawing?
Yes. C510 Phosphor Bronze C510 Phosphor Bronze forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
How clean are the edges produced by CNC Saw Cutting on C510 Phosphor Bronze?
Machined C510 Phosphor Bronze edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.
What tolerances can you hold for CNC Saw Cutting C510 Phosphor Bronze?
Achievable tolerances for C510 Phosphor Bronze forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.