VT machining specialises in CNC Punching EN24 Steel. Because EN24 Steel is strong, economical and widely available, and its machinability is good to excellent depending on carbon content; free-machining grades cut cleanly, we plan each job around the grade to protect accuracy and surface quality.
CNC Punching Capability for EN24 Steel
- Carbon/low-alloy grades
- Economical & weldable
- Tolerance to ±0.02 mm
- Hardenable by heat treat
EN24 Steel Material Data
| Density | 7.85 g/cm³ |
|---|---|
| Tensile strength | 585 MPa |
| Yield strength (0.2%) | 450 MPa |
| Hardness | 170 HB |
| Melting point | 1420–1460 °C |
| Thermal conductivity | 51.9 W/m·K |
| Thermal expansion | 11.5 ×10⁻⁶/K |
| Electrical conductivity | 9% |
| Machinability (C36000 = 100%) | 57% |
| Grades we run | 1018, 1045, 1215, A36, S45C, St37, 4140 (see alloy steel) |
Published typical values for 1045. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Rust. Bare steel flash-rusts within hours in a humid container, so parts are oiled or passivated before packing unless you specify otherwise.
Machining EN24 Steel with CNC Punching
The machinability of EN24 Steel is good to excellent depending on carbon content; free-machining grades cut cleanly. For CNC Punching we select tooling, feeds, speeds and coolant to match, keeping the EN24 Steel workpiece stable and the result accurate.
Because we machine EN24 Steel regularly, proven settings shorten setup and keep quality repeatable across reorders.
Achievable Tolerances for CNC Punching EN24 Steel
| Feature | Standard | Precision |
|---|---|---|
| Hole position across sheet | ±0.15 mm | ±0.10 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Overall blank size | ±0.20 mm | ±0.10 mm |
| Minimum hole | 1.0 × thickness | 0.8 × thickness |
| Hole-to-edge distance | 2.0 × thickness | 1.5 × thickness |
| Burr height | 0.08 mm | 0.03 mm (deburred) |
| Sheet thickness range | 0.5–6.0 mm | 0.5–3.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why EN24 Steel?
Specifying EN24 Steel for CNC Punching EN24 Steel is usually about its properties: strong, economical and widely available. Tell us the condition you need and we machine to it.
Secondary Operations & Finishing
We complete EN24 Steel components with the secondary steps your drawing calls for. We arrange heat treatment, surface treatment, marking and assembly as needed. Tell us the final spec and we will plan the full route so parts arrive ready to use.
CNC Punching Quality & Inspection
Consistent quality comes from disciplined process control. Critical dimensions on EN24 Steel parts are checked in-process and verified at final inspection using calibrated instruments and, where required, CMM measurement. Full documentation — dimensional reports, mill certs, FAIR — is available when your programme needs it.
CNC Punching Tolerances & Surface Finish
Punched EN24 Steel holds hole-position repeatability around ±0.10 mm across the sheet, with consistent hole quality when punch/die clearance is matched to the gauge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Design Tips for CNC Punching EN24 Steel
A few design choices make a real difference to cost and quality. Keeping hole-to-edge and hole-to-hole distances at least 1.5–2× thickness avoids distortion and tearing in punched EN24 Steel. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Punching EN24 Steel
CNC Punching of EN24 Steel supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
How to Order CNC Punching EN24 Steel
Ordering EN24 Steel parts is straightforward. Provide the drawing, material, quantity and any certification needs. Our engineers reply — in English — with feasibility, pricing and a realistic lead time, usually within one business day.
Finishing Options for EN24 Steel
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Black oxide | 1–2 µm | Mild corrosion resistance, no dimensional change |
| Zinc plate + clear/yellow | 5–12 µm | ASTM B633, general corrosion protection |
| Nickel plate (electroless) | 10–25 µm | Uniform in bores, 500 HV after bake |
| Phosphate | 5–10 µm | Paint key, mild lubricity |
| Powder coat | 60–120 µm | RAL colours |
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Punching EN24 Steel
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact EN24 Steel grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
EN24 Steel in Other Processes
Related
Send the drawing, the EN24 Steel condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
Does CNC Punching EN24 Steel require dedicated tooling?
Punching uses programmable turret tooling; standard tools cover most patterns, with special tools added for unique forms.
How clean are the edges produced by CNC Punching on EN24 Steel?
Punched EN24 Steel edges are clean when punch/die clearance is correct; we set clearance to the gauge and can add deburring if specified.
Can VT machining make custom EN24 Steel parts to my drawing?
Yes. EN24 Steel EN24 Steel punching is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Punching EN24 Steel and how is it done?
CNC Punching EN24 Steel refers to cNC turret punching shears holes and form features in sheet metal using programmable tooling for fast, repeatable patterns. Applied to EN24 Steel — strong, economical and widely available — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is EN24 Steel a good choice for CNC Punching?
EN24 Steel is strong, economical and widely available, which makes it well suited to CNC Punching. We tune the process to the alloy so the finished EN24 Steel punching part meets your dimensional and functional requirements.
What is the typical lead time and minimum order for CNC Punching EN24 Steel?
CNC Punching prototypes for EN24 Steel can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.