CNC Punching C17510 Beryllium Copper is part of VT machining's grade-specific capability. C17510 Beryllium Copper is high-strength, conductive and non-sparking, and we combine controlled punching with material-aware setup to produce parts that meet your specification.
CNC Punching Capability for C17510 Beryllium Copper
- Heat-treatable to high strength
- Good conductivity
- Non-sparking
- Excellent fatigue life
C17510 Beryllium Copper Material Data
| Density | 8.25 g/cm³ |
|---|---|
| Tensile strength | 1140–1380 MPa |
| Yield strength (0.2%) | 1000–1200 MPa |
| Hardness | 36–42 HRC |
| Melting point | 866–980 °C |
| Thermal conductivity | 105–130 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 22% |
| Machinability (C36000 = 100%) | 20–35% |
| Grades we run | C17200, C17300, C17510 (high conductivity), C17410 |
Published typical values for C17200 (TH04/AT). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Machined in the solution-annealed state and age-hardened afterwards, which shrinks the part by roughly 0.1–0.2%. That shrink is compensated in the program.
Machining C17510 Beryllium Copper with CNC Punching
When punching C17510 Beryllium Copper, machinability is good; heat-treatable to high strength with good conductivity. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for C17510 Beryllium Copper mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Punching C17510 Beryllium Copper
| Feature | Standard | Precision |
|---|---|---|
| Hole position across sheet | ±0.15 mm | ±0.10 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Overall blank size | ±0.20 mm | ±0.10 mm |
| Minimum hole | 1.0 × thickness | 0.8 × thickness |
| Hole-to-edge distance | 2.0 × thickness | 1.5 × thickness |
| Burr height | 0.08 mm | 0.03 mm (deburred) |
| Sheet thickness range | 0.5–6.0 mm | 0.5–3.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Why C17510 Beryllium Copper?
Customers select C17510 Beryllium Copper for CNC Punching because it is high-strength, conductive and non-sparking. We handle grade verification and any required heat treatment or finishing.
CNC Punching Tolerances & Surface Finish
Punched C17510 Beryllium Copper holds hole-position repeatability around ±0.10 mm across the sheet, with consistent hole quality when punch/die clearance is matched to the gauge.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Design Tips for CNC Punching C17510 Beryllium Copper
Small design adjustments often cut cost and lead time. Keeping hole-to-edge and hole-to-hole distances at least 1.5–2× thickness avoids distortion and tearing in punched C17510 Beryllium Copper. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Punching Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
Secondary Operations & Finishing
Most C17510 Beryllium Copper parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
Applications of CNC Punching C17510 Beryllium Copper
C17510 Beryllium Copper parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Punching C17510 Beryllium Copper
Starting your project takes one email. Send your CAD or 2D drawing, the C17510 Beryllium Copper grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for C17510 Beryllium Copper
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Punching C17510 Beryllium Copper
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C17510 Beryllium Copper grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C17510 Beryllium Copper in Other Processes
Related
Send the drawing, the C17510 Beryllium Copper condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Punching C17510 Beryllium Copper?
Punching suits C17510 Beryllium Copper sheet roughly 0.5–6 mm thick, with clearance matched to the gauge.
What tolerances can you hold for CNC Punching C17510 Beryllium Copper?
Achievable tolerances for C17510 Beryllium Copper punching depend on the alloy, geometry and feature size. Punching holds hole-position repeatability to around ±0.10 mm. Exact figures are confirmed against your drawing callouts.
Which industries use CNC Punching C17510 Beryllium Copper parts?
CNC Punching C17510 Beryllium Copper parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C17510 Beryllium Copper components are required.
Does CNC Punching C17510 Beryllium Copper require dedicated tooling?
Punching uses programmable turret tooling; standard tools cover most patterns, with special tools added for unique forms.