VT machining provides CNC Press Brake Forming Titanium for customers who need accurate, repeatable Titanium components. Because Titanium is high strength-to-weight, biocompatible, corrosion resistant, we adapt the process to suit — controlling the variables that matter for this alloy.
Process Data for CNC Press Brake Forming Titanium
| Minimum inside bend radius | ~3 × t (across the grain) |
|---|---|
| Press force, 2 mm sheet, V16 die | ~32.4 t per metre |
| Typical springback at 90° | 4-8° |
| Angle tolerance | ±0.5° (CNC back-gauge, angle measurement on first part) |
| Tooling | Sectional punches, multi-V dies, hemming and offset tools |
Shown for Grade 5 Titanium, the most common Titanium grade we see for CNC Press Brake Forming. Typical values for Grade 5 Titanium, Annealed; confirmed on the first part.
CNC Press Brake Forming Capability for Titanium
- Tonnage matched to material
- Air, bottom & coining
- Repeatable bend angles
- Long-part capability
Titanium material properties, finishing options and grade notes are on our CNC Bending Titanium page.
How CNC Press Brake Forming Titanium Works
The Titanium blank is bent or formed against tooling under CNC-controlled ram travel and back-gauge positioning. Bend allowance and springback are compensated in the program so finished angles hit the print.
Every job begins from your CAD model or 2D drawing. Fixturing and tool paths are planned so the most critical dimensions are produced in the most rigid, repeatable setup. Critical dimensions are checked on the first part and monitored through the run.
Achievable Tolerances for CNC Press Brake Forming Titanium
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Press Brake Forming Tolerances & Surface Finish
Formed Titanium holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Press Brake Forming Titanium
A few design choices make a real difference to cost and quality. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Titanium. If you send your model early, we will return practical DFM feedback before you commit to production.
Applications of CNC Press Brake Forming Titanium
CNC Press Brake Forming of Titanium supports parts across aerospace, medical, automotive, electronics, semiconductor, energy and general industrial sectors. We scale from one-off prototypes to ongoing production while holding the same quality.
Typical Titanium Parts for CNC Press Brake Forming
Illustrative examples of CNC Press Brake Forming Titanium parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Mounting bracket
- Material
- Titanium
- Size
- 120 × 60 mm, 2 bends
- Key callouts
- Angle ±0.5°, hole-to-bend ±0.15 mm
- Batch
- 3,000 pcs
Holes placed at least 2.5 × thickness from the bend line so they do not distort.
Radiused cover
- Material
- Titanium
- Size
- R150 × 500 mm
- Key callouts
- Radius ±1 mm, no tool marks
- Batch
- 200 pcs
Bumped in 14 small steps rather than rolled, because the batch does not justify a roll set.
Chassis with countersinks
- Material
- Titanium
- Size
- 450 × 300 × 2 mm
- Key callouts
- Countersink depth ±0.1 mm, 6 bends
- Batch
- 700 pcs
Countersinks formed before bending while the sheet is still flat and supported.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Press Brake Forming
Other Processes for Titanium
Send the drawing, the Titanium grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
What material thickness or size range suits CNC Press Brake Forming Titanium?
We form Titanium sheet and plate to your developed flat pattern and bend sequence.
Which industries use CNC Press Brake Forming Titanium parts?
CNC Press Brake Forming Titanium parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise Titanium components are required.
What surface finish is achievable on Titanium with CNC Press Brake Forming?
Surface finish on Titanium is controlled to your specification; we confirm the achievable Ra against your callout.
Does CNC Press Brake Forming Titanium require dedicated tooling?
Most Titanium forming work uses standard cutting tools and CNC programs; dedicated fixtures are made only when geometry or volume requires them.
Can VT machining make custom Titanium parts to my drawing?
Yes. Titanium forming is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What tolerances can you hold for CNC Press Brake Forming Titanium?
Achievable tolerances for Titanium forming depend on the alloy, geometry and feature size. We hold tight, repeatable tolerances appropriate to the feature and material. Exact figures are confirmed against your drawing callouts.