CNC Press Brake Forming Nickel 201 from VT machining delivers precision Nickel 201 parts made to your exact drawing. Press brake forming creates bends and complex profiles with CNC-controlled ram depth and gauging, with parameters tuned to Nickel 201, which is corrosion and heat resistant.
CNC Press Brake Forming Capability for Nickel 201
- Corrosion & heat resistant
- High purity grades
- Tolerance to ±0.01 mm
- Good weldability
Nickel 201 Material Data
| Density | 8.89 g/cm³ |
|---|---|
| Tensile strength | 460 MPa |
| Yield strength (0.2%) | 148 MPa |
| Hardness | 110 HB |
| Melting point | 1435–1446 °C |
| Thermal conductivity | 70 W/m·K |
| Thermal expansion | 13.3 ×10⁻⁶/K |
| Electrical conductivity | 23% |
| Machinability (C36000 = 100%) | 30% |
| Grades we run | Nickel 200, Nickel 201, Alloy 400, Alloy 600 |
Published typical values for Nickel 200. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Gummy and work-hardening at once. Sharp tools, positive rake, and a deliberate depth of cut that stays under the hardened skin from the previous pass.
Machining Nickel 201 with CNC Press Brake Forming
When forming Nickel 201, machinability is moderate; work-hardens, sharp tooling required. Our process plan reflects this so the finished part holds its tolerances without distortion or poor finish.
Documented parameters for Nickel 201 mean predictable cycle times and stable, repeatable results.
Achievable Tolerances for CNC Press Brake Forming Nickel 201
| Feature | Standard | Precision |
|---|---|---|
| Bend angle | ±1.0° | ±0.5° |
| Flange length | ±0.30 mm | ±0.15 mm |
| Hole-to-bend distance | ±0.30 mm | ±0.15 mm |
| Minimum inside radius | 1.0 × thickness | 0.8 × thickness |
| Minimum flange height | 4 × thickness + radius | 3 × thickness + radius |
| Bend-to-bend spacing | ±0.30 mm | ±0.15 mm |
| Sheet thickness range | 0.5–8.0 mm | 0.5–4.0 mm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Press Brake Forming Nickel 201
Small design adjustments often cut cost and lead time. Consistent bend radii, adequate flange lengths and grain-direction awareness reduce cracking and springback in formed Nickel 201. If you send your model early, we will return practical DFM feedback before you commit to production.
Secondary Operations & Finishing
Most Nickel 201 parts need some finishing, which we manage in-house or through vetted partners. Options include deburring and edge-breaking, heat treatment, surface grinding, polishing, and plating or anodising for corrosion resistance and appearance. Give us the finished-part requirement and we will sequence every operation correctly.
CNC Press Brake Forming Quality & Inspection
Quality is built in, not inspected on. We monitor key features during the run and confirm them at final inspection, with CMM verification available for tight tolerances. We provide the inspection and traceability records your quality system requires.
CNC Press Brake Forming Tolerances & Surface Finish
Formed Nickel 201 holds bend angles to about ±0.5° and consistent flange dimensions, with bend allowance compensated for the material and thickness.
Exact achievable figures depend on the alloy, the feature size and the part geometry. Tell us which dimensions are critical and we will advise feasibility up front.
Why Nickel 201?
Customers select Nickel 201 for CNC Press Brake Forming because it is corrosion and heat resistant. We handle grade verification and any required heat treatment or finishing.
Applications of CNC Press Brake Forming Nickel 201
Nickel 201 parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
How to Order CNC Press Brake Forming Nickel 201
Starting your project takes one email. Send your CAD or 2D drawing, the Nickel 201 grade and condition, the quantity and any finish or inspection requirements. We respond quickly with price, lead time and any DFM notes, in clear English.
Finishing Options for Nickel 201
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Press Brake Forming Nickel 201
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Nickel 201 grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Nickel 201 in Other Processes
Related
Send the drawing, the Nickel 201 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What surface finish is achievable on Nickel 201 with CNC Press Brake Forming?
Surface finish on Nickel 201 is controlled to your specification; we confirm the achievable Ra against your callout.
What material thickness or size range suits CNC Press Brake Forming Nickel 201?
We form Nickel 201 sheet and plate to your developed flat pattern and bend sequence.
What is the typical lead time and minimum order for CNC Press Brake Forming Nickel 201?
CNC Press Brake Forming prototypes for Nickel 201 can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
How clean are the edges produced by CNC Press Brake Forming on Nickel 201?
Machined Nickel 201 edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.