CNC Plasma Cutting Titanium is a core capability at VT machining. We combine controlled cutting with material-aware setup for Titanium — an alloy that is high strength-to-weight, biocompatible, corrosion resistant — to produce parts that meet your specification first time.
Process Data for CNC Plasma Cutting Titanium
| Max practical thickness | ~20 mm (high-definition plasma) |
|---|---|
| Edge tolerance | ±0.3-0.5 mm, 1-3° bevel |
| Heat-affected zone | ~0.5-1.5 mm (allow machining stock if critical) |
| Plasma gas | Nitrogen or argon-hydrogen |
Shown for Grade 5 Titanium, the most common Titanium grade we see for CNC Plasma Cutting. Typical values for Grade 5 Titanium, Annealed; confirmed on the first part.
CNC Plasma Cutting Capability for Titanium
- Plate to 30+ mm
- High cutting speed
- Conductive metals
- Bevel-cut capable
Titanium material properties, finishing options and grade notes are on our CNC Laser Cutting Titanium page.
How CNC Plasma Cutting Titanium Works
A focused fibre-laser beam melts and blows material from the Titanium sheet along the programmed contour. Power, focal position, nozzle stand-off and assist-gas pressure are tuned to the alloy and thickness for a clean, square edge.
We start from your supplied geometry and tolerance scheme. The setup is designed to minimise re-clamping, which protects positional accuracy across features. A first article is verified against the drawing before the balance of the batch is released.
Achievable Tolerances for CNC Plasma Cutting Titanium
| Feature | Standard | Precision |
|---|---|---|
| Contour dimension | ±0.10 mm | ±0.05 mm |
| Hole diameter | ±0.10 mm | ±0.05 mm |
| Kerf width | 0.20 mm | 0.10 mm |
| Squareness of cut edge | 0.5° | 0.2° |
| Heat-affected zone | 0.15 mm | 0.05 mm (N₂ assist) |
| Minimum hole diameter | 1.2 × thickness | 1.0 × thickness |
| Edge condition | light dross | burr-free, N₂ cut |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
Design Tips for CNC Plasma Cutting Titanium
Small design adjustments often cut cost and lead time. Keeping holes no smaller than the material thickness, allowing for kerf, and grouping features sensibly improves edge quality and nesting yield on Titanium. If you send your model early, we will return practical DFM feedback before you commit to production.
CNC Plasma Cutting Tolerances & Surface Finish
Laser-cut Titanium holds contour tolerances around ±0.05 mm depending on thickness, with a narrow kerf and a clean, near burr-free edge.
The tightest tolerances are reserved for the features your drawing flags as critical. Share your tolerance scheme and we will confirm what is realistic before quoting.
Applications of CNC Plasma Cutting Titanium
Titanium parts made this way are found throughout aerospace, medical, automotive, electronics and industrial equipment. Prototype, bridge and production volumes are all welcome.
Typical Titanium Parts for CNC Plasma Cutting
Illustrative examples of CNC Plasma Cutting Titanium parts and the callouts that usually drive the process plan. They show the kind of work that fits this process; they are not specific customer orders.
Bracket blank
- Material
- Titanium
- Size
- 250 × 120 × 4 mm
- Key callouts
- Contour ±0.10 mm, bend-relief notches
- Batch
- 800 pcs
Bend reliefs cut in at the same time so the press brake does not tear the corner.
Control panel face
- Material
- Titanium
- Size
- 400 × 300 × 1.5 mm
- Key callouts
- Cutout position ±0.10 mm, no dross on visible face
- Batch
- 600 pcs
Cut with nitrogen so the edge takes powder coat without secondary grinding.
EMI shield can
- Material
- Titanium
- Size
- 60 × 45 × 0.3 mm
- Key callouts
- Contour ±0.05 mm, tab width 0.5 mm
- Batch
- 5,000 pcs
Nested 96-up per sheet; nesting is where the cost comes out of a part this small.
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Plasma Cutting Titanium
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Titanium grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Other Metals for CNC Plasma Cutting
Other Processes for Titanium
Send the drawing, the Titanium grade and the quantity. You get pricing, lead time and any DFM notes back — usually within one business day.
Request a QuoteFrequently Asked Questions
Can VT machining make custom Titanium parts to my drawing?
Yes. Titanium cutting is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.
What is CNC Plasma Cutting Titanium and how is it done?
CNC Plasma Cutting Titanium refers to cNC plasma cutting uses an ionized gas jet to sever thicker conductive plate at high speed. Applied to Titanium — high strength-to-weight, biocompatible, corrosion resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
What surface finish is achievable on Titanium with CNC Plasma Cutting?
Laser cutting leaves a clean cut face on Titanium with a small heat-affected zone; most parts need little secondary finishing.
What material thickness or size range suits CNC Plasma Cutting Titanium?
Laser-cut Titanium thickness depends on the alloy and its reflectivity; we tune the fiber source and assist gas accordingly.