CNC Milling C519 Phosphor Bronze is part of VT machining's grade-specific capability. C519 Phosphor Bronze is springy, low-friction and corrosion-resistant, and we combine controlled machining with material-aware setup to produce parts that meet your specification.
CNC Milling Capability for C519 Phosphor Bronze
- Spring temper available
- Good fatigue life
- Corrosion resistant
- Low-friction
C519 Phosphor Bronze Material Data
| Density | 8.86 g/cm³ |
|---|---|
| Tensile strength | 325–965 MPa |
| Yield strength (0.2%) | 140–550 MPa |
| Hardness | 60–200 HV |
| Melting point | 975–1060 °C |
| Thermal conductivity | 69 W/m·K |
| Thermal expansion | 17.8 ×10⁻⁶/K |
| Electrical conductivity | 15% |
| Machinability (C36000 = 100%) | 20% |
| Grades we run | C51000, C51900, C52100, C54400 free-cutting |
Published typical values for C51000. Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Spring temper is destroyed by heat. Contacts and spring fingers are etched or wire-EDM cut, never laser cut.
Machining C519 Phosphor Bronze with CNC Milling
C519 Phosphor Bronze behaves predictably under CNC Milling once parameters are dialled in: machinability is good; springy with excellent fatigue life, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of C519 Phosphor Bronze run consistently from one batch to the next.
Achievable Tolerances for CNC Milling C519 Phosphor Bronze
| Feature | Standard | Precision |
|---|---|---|
| Linear dimension (< 100 mm) | ±0.05 mm | ±0.010 mm |
| Linear dimension (100–300 mm) | ±0.10 mm | ±0.025 mm |
| Hole diameter (reamed) | H9 | H7 |
| True position of hole pattern | ±0.10 mm | ±0.025 mm |
| Flatness over 100 mm | 0.05 mm | 0.015 mm |
| Perpendicularity | 0.10 mm | 0.020 mm |
| Surface finish, as machined | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Milling Tolerances & Surface Finish
For CNC Milling, dimensional and positional tolerances around ±0.01 mm are routine, tightening toward ±0.005 mm on precision setups. Surface finish on machined faces typically falls in the Ra 0.4–1.6 µm range depending on tooling and pass strategy.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Secondary Operations & Finishing
Finished C519 Phosphor Bronze parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Milling Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every C519 Phosphor Bronze part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Design Tips for CNC Milling C519 Phosphor Bronze
We are happy to suggest design tweaks that improve manufacturability. Generous internal radii, sensible pocket depth-to-width ratios and avoiding very thin unsupported walls all reduce cost and improve accuracy in C519 Phosphor Bronze. If you send your model early, we will return practical DFM feedback before you commit to production.
Why C519 Phosphor Bronze?
C519 Phosphor Bronze is chosen when a part needs what this grade offers — it is springy, low-friction and corrosion-resistant. We confirm the grade and any temper or heat-treat condition with you before machining.
Applications of CNC Milling C519 Phosphor Bronze
Customers order CNC Milling C519 Phosphor Bronze components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Milling C519 Phosphor Bronze
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for C519 Phosphor Bronze
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Milling C519 Phosphor Bronze
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact C519 Phosphor Bronze grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
C519 Phosphor Bronze in Other Processes
Related
Send the drawing, the C519 Phosphor Bronze condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Milling C519 Phosphor Bronze?
CNC Milling prototypes for C519 Phosphor Bronze can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
Which industries use CNC Milling C519 Phosphor Bronze parts?
CNC Milling C519 Phosphor Bronze parts are used across aerospace, medical, automotive, electronics, semiconductor and general industrial sectors — anywhere precise C519 Phosphor Bronze components are required.
What is CNC Milling C519 Phosphor Bronze and how is it done?
CNC Milling C519 Phosphor Bronze refers to multi-axis milling cutters remove material to produce prismatic features, pockets, slots and contoured 3D surfaces. Applied to C519 Phosphor Bronze — springy, low-friction and corrosion-resistant — VT machining produces each part to your CAD drawing, selecting parameters from your tolerance, finish and quantity requirements.
Why is C519 Phosphor Bronze a good choice for CNC Milling?
C519 Phosphor Bronze is springy, low-friction and corrosion-resistant, which makes it well suited to CNC Milling. We tune the process to the alloy so the finished C519 Phosphor Bronze machining part meets your dimensional and functional requirements.
How clean are the edges produced by CNC Milling on C519 Phosphor Bronze?
Machined C519 Phosphor Bronze edges are clean and to specification; edge-break or deburring is added when your drawing calls for it.