Need reliable CNC Lathe Machining Hastelloy C276? VT machining machines Hastelloy C276 to tight tolerances and consistent quality. As a material, Hastelloy C276 is high-temperature strength and oxidation resistance; we adapt feeds, speeds and tooling to suit.
CNC Lathe Machining Capability for Hastelloy C276
- High-temperature strength
- Oxidation resistant
- Tolerance to ±0.01 mm
- Aerospace-grade
Hastelloy C276 Material Data
| Density | 8.19 g/cm³ |
|---|---|
| Tensile strength | 1375 MPa |
| Yield strength (0.2%) | 1100 MPa |
| Hardness | 36–44 HRC |
| Melting point | 1260–1336 °C |
| Thermal conductivity | 11.4 W/m·K |
| Thermal expansion | 13.0 ×10⁻⁶/K |
| Electrical conductivity | 1.4% |
| Machinability (C36000 = 100%) | 12–15% |
| Grades we run | 600, 625, 718, X-750, 725 |
Published typical values for Inconel 718 (aged). Other grades in the family differ — the certificate supplied with your order carries the actual heat-lot figures.
Tool life is measured in minutes, not hours. Ceramic or coated-carbide tooling, low surface speed, high pressure coolant, and a scheduled tool change rather than waiting for failure.
Machining Hastelloy C276 with CNC Lathe Machining
Hastelloy C276 behaves predictably under CNC Lathe Machining once parameters are dialled in: machinability is very difficult; rigid setups, carbide/ceramic tooling, low speeds, and we tune the operation accordingly.
We hold reference parameters for this grade, so repeat orders of Hastelloy C276 run consistently from one batch to the next.
Achievable Tolerances for CNC Lathe Machining Hastelloy C276
| Feature | Standard | Precision |
|---|---|---|
| Outside diameter | ±0.05 mm | ±0.005 mm |
| Bore diameter | H9 | H6 |
| Length / shoulder position | ±0.10 mm | ±0.020 mm |
| Concentricity OD to ID | 0.05 mm TIR | 0.010 mm TIR |
| Roundness | 0.02 mm | 0.005 mm |
| Thread class | 6g / 2A | 4h / 3A |
| Surface finish, as turned | Ra 1.6 µm | Ra 0.4 µm |
Standard is what a normal quotation assumes. Precision is available on nominated features and is priced separately, because it needs extra setups, in-process gauging and CMM verification. Call out only the features that need it — blanket-tightening a drawing is the single most common reason a quote comes back expensive.
CNC Lathe Machining Tolerances & Surface Finish
Turned Hastelloy C276 holds diameter tolerances to about ±0.005 mm with concentricity within 0.01 mm and good roundness. Turned finishes of Ra 0.4–0.8 µm are achievable with finishing passes and sharp tooling.
Final tolerances are governed by the material's behaviour, wall thickness and overall stiffness. We give honest DFM feedback if a callout would be costly or better achieved another way.
Design Tips for CNC Lathe Machining Hastelloy C276
We are happy to suggest design tweaks that improve manufacturability. Consistent diameters, standard thread forms and avoiding extremely long, slender features help Hastelloy C276 turned parts stay concentric and economical. If you send your model early, we will return practical DFM feedback before you commit to production.
Why Hastelloy C276?
Hastelloy C276 is chosen when a part needs what this grade offers — it is high-temperature strength and oxidation resistance. We confirm the grade and any temper or heat-treat condition with you before machining.
Secondary Operations & Finishing
Finished Hastelloy C276 parts can move straight into secondary operations under one roof. Typical add-ons are deburring, passivation, anodising, plating, blasting, polishing and laser marking. We coordinate the whole chain so you receive complete, inspection-ready parts.
CNC Lathe Machining Quality & Inspection
We control quality throughout the process, not just at the end. In-process checks plus final inspection — including CMM where specified — keep every Hastelloy C276 part to print. Inspection reports, material certificates and first-article documentation can be supplied on request.
Applications of CNC Lathe Machining Hastelloy C276
Customers order CNC Lathe Machining Hastelloy C276 components for everything from instrumentation to structural and functional assemblies. Whether you need a single prototype or recurring production volume, the same process discipline applies.
How to Order CNC Lathe Machining Hastelloy C276
Getting a quote is simple. Share your model, the material grade, your quantity and target tolerances. You receive a clear quotation with lead time and honest manufacturability feedback.
Finishing Options for Hastelloy C276
| Finish | Thickness / effect | Why it gets specified |
|---|---|---|
| Deburr / edge break | 0.05–0.3 mm | All parts unless the drawing says otherwise |
| Bead blast | Ra 1.6–3.2 µm | Uniform matt finish, hides tool marks |
| Laser marking | — | Part number, lot code, data matrix |
No drawing yet? Build one in the browser.
Set the metal, dimensions and features, watch the 3D model update as you type, then switch to the 2D sheet to add dimensions and tolerances. Download it or send it straight to us with your RFQ.
What We Need to Quote CNC Lathe Machining Hastelloy C276
- GeometrySTEP or IGES for the 3D model, plus a PDF drawing if you have tolerance callouts. A dimensioned sketch is enough to start.
- MaterialThe exact Hastelloy C276 grade and condition — temper, heat-treat state or hardness. If you are not sure, tell us the function and we will suggest one.
- QuantityPrototype count and the expected annual volume. Both change how the part is made and therefore what it costs.
- TolerancesWhich features are critical. Everything else runs to our standard tolerance, which is what keeps the price sensible.
- FinishSurface treatment, cosmetic requirements, and any faces that must be masked.
- DocumentsWhether you need a material certificate, dimensional report, FAIR or PPAP with the shipment.
Missing something from the list is not a problem — send what you have. We will come back with the specific questions rather than a generic form.
Hastelloy C276 in Other Processes
Related
Send the drawing, the Hastelloy C276 condition and the quantity — pricing and lead time come back the same or next business day.
Request a QuoteFrequently Asked Questions
What is the typical lead time and minimum order for CNC Lathe Machining Hastelloy C276?
CNC Lathe Machining prototypes for Hastelloy C276 can be produced quickly and scaled to series production. Send your drawing and quantity and we will advise lead time and any minimum order.
What material thickness or size range suits CNC Lathe Machining Hastelloy C276?
Turned Hastelloy C276 parts are produced from bar or chuck stock across a wide diameter range.
What surface finish is achievable on Hastelloy C276 with CNC Lathe Machining?
Surface finish on Hastelloy C276 is controlled to your specification; we confirm the achievable Ra against your callout.
Why is Hastelloy C276 a good choice for CNC Lathe Machining?
Hastelloy C276 is high-temperature strength and oxidation resistance, which makes it well suited to CNC Lathe Machining. We tune the process to the alloy so the finished Hastelloy C276 turning part meets your dimensional and functional requirements.
Can VT machining make custom Hastelloy C276 parts to my drawing?
Yes. Hastelloy C276 Hastelloy C276 turning is made to order from your CAD/2D drawing. Share your geometry, material grade, tolerance and quantity and we will confirm feasibility, lead time and pricing.